600,000-3.6 Million Kcal Pellet Burner-manufacture,factory,supplier from China

Low carbon and environmental protection: low carbon emissions, renewable fuel, low nitrogen oxide emissions, and no sulfur emissions.Gasification combustion: segmented combustion, low-temperature combustion in the furnace, and secondary high-temperature combustion at the burner.Applicable fuel: The fixed grate is suitable for wood pellets, and the movable grate can be mixed with straw pellets.Widely used: boilers, dryers, hot blast furnaces, kilns, annealing furnaces, incinerators, aluminum rod heating furnaces, etc.High efficiency and energy saving: It saves more than 50% energy compared with

Product introductionGas and air are premixed evenly before entering the combustion head. The combustion head is in the shape of a metal cylinder, and a metal mesh (made of a special alloy) is used to wrap the surface of the metal cylinder. In fully premixed combustion, the flame is only generated on the surface of the burner, and the actual size of the flame is the same as the size of the combustion head. Therefore, the fully premixed burner does not require a large furnace size and can still achieve perfect combustion in a small furnace.

Product introductionThe gas enters the tube under a certain pressure, escapes through the fire hole, obtains oxygen from the surrounding air, and burns, forming a diffusion flame.Mechanical characteristics(1) Simple structure and convenient manufacturing(2) The combustion is stable and will not backfire; it is easy to ignite and adjust(3) Low-pressure gas (200~400Pa or lower) can be used, and no blowing is required and no power consumption is required.(4) The combustion heat intensity is low, the flame is long, and a larger combustion chamber is required.(5) In order to achieve complete combus

Product introductionThe biomass pellet machine is a kind of biomass energy pretreatment equipment. It mainly uses agricultural and forestry processing waste such as wood chips, straw, rice husks, bark and other biomass as raw materials.

Product introductionBiomass fuel is burned in the furnace with reasonable air distribution and gasification components. This secondary air has a very obvious effect. One is to supplement oxygen, and the other is to further strengthen the disturbance of flue gas to make combustion more complete. At present, a large amount of air supplementation is used.

Machine Description:The fixed paper stopper is composed of a plate type.Spray paint on the surface of the fixed plate.Fabricated steel structure.Install in the pit.Working width: 3600mm\4800mm.

1. Machine main frameGantry type frame, made of square steel tube, material: Q235 steel.Driving motor base is installed on the frame.The rotary arm is fixed on the frame connecting with slew bearing.Frame size: (to be confirmed by drawing)2. Driving device for rotary armFrequency control motor with brake Brand of motor: Local famous brand, Power rated: 1.5KW   Rotary arm speed: n=25rpm (frequency motor with brake)3.

Firstly. What is a bamboo chip machine?A bamboo chip machine is a machine specially used to cut bamboo into slices. It is one of the indispensable equipment in the bamboo processing industry.Second. Bamboo chip machine varietiesAccording to different working methods and uses, bamboo chip machines can be divided into the following varieties:1. Manual bamboo chip machineA manual bamboo chip machine is a simple mechanical equipment, mainly composed of a cutter, a support frame and a manual control device. It is suitable for small-scale bamboo processing, with simple operation and low cost.2.

The wet material is sent to the hopper by a belt conveyor or bucket elevator, and then enters the feeding end through the feeding pipe of the feeding machine of the hopper. At the same time, the hot air enters the barrel through swirling flow. A fire baffle is installed inside the barrel to prevent hot air from coming into contact with the material to prevent fire. Gravity and centrifugal force are used to disperse materials with different moisture content in different cylinders.

1.Applicablepalletsize:L1000~1200*W1000~1200*H120~150mm2.Applicablepackagesize:350~2000mm(includingpallet)3.Applicableproductweight:Groundbearing.4.Applicablepowersupply:3-phase380V50HZ2KW5.Applicableair:5kgf/cm2,450NL/min6.Singlestrappingspeed:PP20seconds/strap,excludingconveying,hostlifting,positioningtime7.PPstrap:width15~16mm,thickness0.7-0.8mm,skewness<30mm,Thecustomerprovidesthetestmachinestrapbeforeshipment.8.Hotstickingpart:sideface,hotmelttype9.Packingmethod:movementoftheentiremovement(250mmlength)10.Numberofstraps:1~6optional(thestrappositionissetbythecontrolpanel)11.Theloweststra

Machine Description：The maximum lifting weight is 4 tons.The lifting height is 5.5m.Up and down frequency 40 times/hourThe upender elevator utilizes the weight of the paper roll andthe counterweight to stand up while lowering it, which is   convenient for the transportation of the clamp type forklift and the stacking   of the paper roll.The elevator adopts chain lifting,   frequency conversion speed regulation, variable speed start and variable stop   design, which can ensure the smooth operation of the machine.The vertical shaft-mounted reducer of   SEW is used for th

The stopping sorting deck is composed of 9\12 stop units, working width: 3600mm, 4800mm, stop unit width: B=400mm, stop unit lifting is realized by pneumatic tires.The stop plate adopts an anti-pinch structure.The stop plate panel is electroplated.The front of each unit must be marked with Arabic numerals in orderFabricated steel structureInstalled in a concrete slopeEquipped with an air control box, the air table is lifted, and the pneumatic control valve is installed in the air control box, which is convenient for maintenance.

General description:The machine includes the:Radial wrapper partsGear and rack driving devicePrecise straight railway Steel frameWhole set of pneumatic control system, user connect to the stop valve inlet.The necessary control box, all the proximity switch and photo-eye frame.Auto hot melt glue spray device, auto film press device, auto film cut device, auto film sticking device.

Product introductionFour-process drum dryer. During the drying process, heat is transferred from the inner wall of the drum to its outer wall, passing through the dried food materials attached to the outer wall of the drum, evaporating the moisture on the materials. It is a continuous drying process. Production machinery. The four-process drum dryer is mainly used in mineral processing, building materials, metallurgy, chemical industry and other departments to dry materials with a certain humidity or particle size.

Product introductionThe so-called vacuum drying is to heat and dry the dry materials under vacuum conditions. If a vacuum pump is used to extract air and moisture, the drying speed will be accelerated.Mechanical characteristicsThe boiling point of the material solution decreases under vacuum. Increase the heat transfer driving force of the evaporator.

Product introductionOur company has developed a new type of hot blast stove for burning biomass wood chips, bark, straw, etc. It has been continuously improved in practice and is now a mature product.

Product introductionThe star-shaped unloader is used to be installed at the discharge port of the unloader that works under negative pressure. The upper part receives the material discharged by the unloader. It relies on the rotating impeller to transport the material and is also responsible for sealing to prevent During the pneumatic conveying process, air is sucked in from the discharge port to ensure the normal discharge of the unloader. As a special unloading equipment, it plays a great role in cleaning and cleaning work.

产品介绍鼓木削片机是破碎段的粗粉设备。它用于将小直径木材、木材采伐残渣（树枝、树枝等）和木材加工残渣（单板、板条、原木芯、废单板等）破碎成可以进入精磨机的木屑。也可用于切割非木材原料（如麻秆、芦苇、莫索竹等）机械特性木材削片机工作时，物料可在破碎腔内充分有效地破碎，产量高、效率高、能耗低、出料均匀。并且使用本设备时噪音低，无污染，操作方便，维护简单。应用范围麻秆、芦苇、莫索竹售后服务承诺：1、供方在交货时，应向买方提供设备使用说明书（电气原理图、电路图等）以及安装维护说明书和装箱单。2.设备有一年保修和终身维护。3、保修期内，对于非人为因素造成的设备故障，当设备出现故障时，卖方将在4小时内做出响应，并提供技术支持，尽快解决问题。在保修期内，我们负责免费提供损坏的零件和配件。保修期过后，只收取配件费用。取得联系如果您有任何问题，请与我们联系，我会尽快与您联系。

Product introductionCow dung dryers (chicken dung dryers, duck dung dryers, horse dung dryers) are suitable for large, medium and small farms and areas with relatively developed breeding industries. According to the requirements of the drying products, different methods can be used. heat source.

ModelLY-50DForming   and sealing speed8-10ctns/minCarton   sizeL200~600xW150~500xH100~500mmPower   supply110/220V,   50/60Hz, 1 PhasePower200WApplicable   tape48/60/75mm   (Choose one type)Machine   sizeL2500×W2000×H1450mmMachine   weight480kg

Product introductionThe flame retardant spray tower is a device that implements absorption operations. Acid mist purification tower, also known as acid mist tower or purification tower, plays the role of removing harmful gases in exhaust gas. The production process performed by electroplating equipment can be divided into three links, namely pre-plating surface treatment, electroplating treatment and post-plating treatment. Electroplating equipment refers to the above-mentioned production equipment that directly processes parts.Mechanical characteristics1.

Warranty1 yearApplicable IndustriesHotels, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Advertising CompanyShowroom LocationNoneVideo outgoing-inspectionProvidedMachinery Test ReportProvidedWarranty of core components2 yearsCore ComponentsMotorPlace of OriginShandong, ChinaWeight130 KGKey Selling PointsLong Service LifeTypeOtherConditionNewApplicationAPPAREL, Beverage, Chemical, Commodity, Food, Machinery

Product introductionThe exhaust gas discharged from the outside of the tower enters the gas distributor in the stainless steel spray tower. After being distributed by the gas distributor, it walks up the tower. During the walking process, when it encounters liquid atomized by the atomizer, the gas and liquid are fully Saturated contact leads to physical absorption or chemical reaction. The neutralized or absorbed liquid enters the liquid storage tank and is pumped by a pump. The neutralized or absorbed standard gas is defogged by a demister and then discharged into the atmosphere.

Product descriptionModelNoteMax.packing SizeL1200 mm x W1200 mmCustomizedMax. wrapping Height2000 mmCustomizedEfficiency45-50 loads/hour/Load Capacity2000 kgCustomizedRotary Arm Rotation Speed0-12 rpm,variable/Protection systemAuto Sense Emergency Brake System/Automatic Film Holder and CutterStd.In-feed and outlet powerful roller conveyorOptional  length.Conveyor speed0-12 m/min, variable/Air supply6-8   kg/cm²/Power SupplyAC220V   1ph 50/60HZ 3.5KW/Machine sizeL 4000 mm x W 4000 mm x H 3200 mm/Machine weight1000 kg/