Acid Washing Tower-manufacture,factory,supplier from China

Product introductionThe flame retardant spray tower is a device that implements absorption operations. Acid mist purification tower, also known as acid mist tower or purification tower, plays the role of removing harmful gases in exhaust gas. The production process performed by electroplating equipment can be divided into three links, namely pre-plating surface treatment, electroplating treatment and post-plating treatment. Electroplating equipment refers to the above-mentioned production equipment that directly processes parts.Mechanical characteristics1.

Product introductionPP spray tower is also called PP washing tower, acid mist purification tower - acid-base waste gas treatment equipment; working principle of spray tower: waste gas is introduced into the purification tower from the air duct, and passes through the packing layer. The waste gas and the absorption liquid are fully gas-liquid two-phase. After contact absorption and neutralization reaction, the exhaust gas is purified, dehydrated and defogged by the demister plate, and then discharged into the atmosphere by the fan.

Product introductionThe exhaust gas discharged from the outside of the tower enters the gas distributor in the stainless steel spray tower. After being distributed by the gas distributor, it walks up the tower. During the walking process, when it encounters liquid atomized by the atomizer, the gas and liquid are fully Saturated contact leads to physical absorption or chemical reaction. The neutralized or absorbed liquid enters the liquid storage tank and is pumped by a pump. The neutralized or absorbed standard gas is defogged by a demister and then discharged into the atmosphere.

Product descriptionLY-1800GYB, this model is a high-speed rocker arm wrapping packaging machine that can be used alone. It occupies a small space and has a high safety factor.

Product descriptionModelNoteMax.packing SizeL1200 mm x W1200 mmCustomizedMax. wrapping Height2000 mmCustomizedEfficiency45-50 loads/hour/Load Capacity2000 kgCustomizedRotary Arm Rotation Speed0-12 rpm,variable/Protection systemAuto Sense Emergency Brake System/Automatic Film Holder and CutterStd.In-feed and outlet powerful roller conveyorOptional  length.Conveyor speed0-12 m/min, variable/Air supply6-8   kg/cm²/Power SupplyAC220V   1ph 50/60HZ 3.5KW/Machine sizeL 4000 mm x W 4000 mm x H 3200 mm/Machine weight1000 kg/

Product introductionBiomass fuel is burned in the furnace with reasonable air distribution and gasification components. This secondary air has a very obvious effect. One is to supplement oxygen, and the other is to further strengthen the disturbance of flue gas to make combustion more complete. At present, a large amount of air supplementation is used.

产品介绍更灵活的切片设备使用柴油发动机作为动力，可以拖曳进行户外生产。具有较强的流动性和较好的流量生产效果。主要适用于粉碎树枝、树干、竹子、麻秆、烟秆、秸秆等物料。，粉碎物料为1-3cm，厚度为5mm。是处理废木料的较好选择。机械特性1.柴油机为动力，可移动，灵活性高2.进料口尺寸大，适用于各种物料。3、进料辊前反可调，防止物料堵塞。4.采用定动刀组合，有效控制物料细度应用范围主要适用于粉碎树枝、树干、竹竿、麻竿、烟竿、秸秆等物料售后服务承诺：1、供方在交货时，应向买方提供设备使用说明书（电气原理图、电路图等）以及安装维护说明书和装箱单。2、设备保修一年，终身维护。3、保修期内，对于非人为因素造成的设备故障，当设备出现故障时，卖方将在4小时内做出响应，并提供技术支持，尽快解决问题。在保修期内，我们负责免费提供损坏的零件和配件。保修期过后，只收取配件费用。 取得联系如果您有任何问题，请与我们联系，我会尽快与您联系。张旭东山东溧阳智能装备有限公司 （Shandong Liyang Intelligent Equipment Co.， Ltd）手机和WhatsApp：0086-18653186367电子邮件： marketing@liyangzn.com地址：山东省济南市张丘区双山街道大友中心2-203号铺 250200

产品介绍秸秆捆回转切割机由框架装置、旋切装置、送料装置和过载保护装置组成。该机结构简单，机身采用钢板，经久耐用，移动方便。送料装置采用外齿轮链旋转，无死角，效率高。旋转切割转子具有锋利的刀片，可以处理各种不同厚度、长度和含水量的捆包和捆包。树枝断裂率高，可以抛出10米远，避免了受伤等事故，保证了操作人员的人身安全。机械特性1、大直径送料：送料直径有2000mm、2500mm、3000mm三种规格可供选择。大直径便于给料堆或成捆的物料，如堆秸秆、牧草、或捆秸秆和牧草。间歇进料、连续破碎、喷射出料的进料口高度约为1米。由于其直径大、高度高，一次进料可进料量大，进料口的旋转带动物料移动到破碎机的转子上，使物料连续破碎，实现间歇进料，降低工人进料强度。破碎后的物料随转子旋转，在离心力的作用下高速从卸料口飞出，节省了输送设备。2、一体化切碎破碎设备的核心部件是安装在破碎转子上的圆盘形刀具和锤子。在操作过程中，大体积的材料被圆盘形切割机切割成小体积，然后用锤子破碎。这种切碎和破碎的工作方法提高了破碎效率。3、核心部件采用耐磨坚韧合金制成。设备的核心部件主要是岩石切割机和锤子。这些零件由具有良好韧性和较强抗冲击性的合金制成。圆盘形刀具具有高硬度和耐磨性，锤子的两个工作边缘焊接了超耐磨硬质合金材料，大大提高了其使用寿命。

Bag dust collector is a dry dust filtering device. It is suitable for capturing fine, dry, non-fibrous dust. The filter bag is made of textile filter cloth or non-woven felt, and uses the filtration effect of fiber fabric to filter dust-containing gas. When the dust-containing gas enters the bag dust collector, the dust with large particles and heavy specific gravity will be removed due to gravity. It will settle down and fall into the ash hopper. When the gas containing fine dust passes through the filter material, the dust is blocked, thus the gas can be purified.1.

Product introductionThe gas enters the tube under a certain pressure, escapes through the fire hole, obtains oxygen from the surrounding air, and burns, forming a diffusion flame.Mechanical characteristics(1) Simple structure and convenient manufacturing(2) The combustion is stable and will not backfire; it is easy to ignite and adjust(3) Low-pressure gas (200~400Pa or lower) can be used, and no blowing is required and no power consumption is required.(4) The combustion heat intensity is low, the flame is long, and a larger combustion chamber is required.(5) In order to achieve complete combus

Product introductionGas and air are premixed evenly before entering the combustion head. The combustion head is in the shape of a metal cylinder, and a metal mesh (made of a special alloy) is used to wrap the surface of the metal cylinder. In fully premixed combustion, the flame is only generated on the surface of the burner, and the actual size of the flame is the same as the size of the combustion head. Therefore, the fully premixed burner does not require a large furnace size and can still achieve perfect combustion in a small furnace.

Product introductionDuring the drying process, heat is transferred from the inner wall of the drum to its outer wall, passing through the dried food materials attached to the outer wall of the drum, evaporating the moisture on the materials. It is a continuous drying production machine.The dryer is mainly used in mineral processing, building materials, metallurgy, chemical industry and other departments to dry materials with a certain humidity or particle size. The dryer has strong adaptability to materials and can dry a variety of materials.

Product introductionThe dehydration dryer is a special equipment developed based on the traditional mesh belt dryer. It has strong pertinence, practicality and high energy efficiency. It is widely used for dehydration and drying of various regional and seasonal vegetables and fruits. . Such as: garlic slices, pumpkin, konjac, white radish, yam, bamboo shoots, etc. Since 1993, our factory began to jointly develop and produce the first domestic mesh belt vegetable dryer for pumpkin dehydration and drying with the Chinese Academy of Sciences.

Product Details：The three-cylinder dryer production line consists of: heat source system, feeding system, conveyor belt, feeding chute, drying equipment, discharge belt, vibrating classification screen, dust removal system, induced draft fan, electronic control system and other equipment. The sand is sent to the hopper by a belt conveyor or bucket elevator, and then enters the feeding end through the feeding pipe through the feeding machine of the hopper.

1.Applicablepalletsize:L1000~1200*W1000~1200*H120~150mm2.Applicablepackagesize:350~2000mm(includingpallet)3.Applicableproductweight:Groundbearing.4.Applicablepowersupply:3-phase380V50HZ2KW5.Applicableair:5kgf/cm2,450NL/min6.Singlestrappingspeed:PP20seconds/strap,excludingconveying,hostlifting,positioningtime7.PPstrap:width15~16mm,thickness0.7-0.8mm,skewness<30mm,Thecustomerprovidesthetestmachinestrapbeforeshipment.8.Hotstickingpart:sideface,hotmelttype9.Packingmethod:movementoftheentiremovement(250mmlength)10.Numberofstraps:1~6optional(thestrappositionissetbythecontrolpanel)11.Theloweststra

V-slat chain conveyor, conveyor width: 800mm, chain pitch P = 63.5 mm, driving speed: 18m/min.(TBD)Slat width: B = 55 mm, slat length: L = 800 mm, Thickness: S = 10mm, carbon steel Slat bearing: model 2016, NSK brand (Japan brand)Designed with high driving speed to meet the production requirement.The conveyor slat is made in V-Shaped, Angle: 170°.  Loading capacity of slat conveyor: 3000 kg/mChain rollers installed with bearing inside, No oil and No contamination on paper rolls.Heavy duty steel structures, modular design, equipped with vertical shaft driving gear reducer.Tensioner adjusti

Turntable diameter: 3000mm.Equipped with big diameter slew bearing for heavy duty bearing, stable run ability and long durability. Rotary turntable motor: SEW brand. V type slat conveyor installed on Turntable, single row V-slat conveyor;Driving   speed:18   m/min (Speed adjustable, Siemens inverter)Chain   pitch:P =   63.5 mmSlat   width:B =   55 mmSlat   length:L =   250 mmThickness:S =   10 mm carbon steelSlat   bearing:China   brandGear   motor:SEW   brand

Battery20AH   (12V)x 4pcsPallet   height1600mmPacking   efficiency12R/MPallet   weightMax:   1500KG Pallet   size1200   x 800mm or 1000 x 1000mmPower   supply11   0V/220V 50HZ/60HZ 1PHASEControl   systemPLCFilm   carriageBrakeCharging   time6-8hoursRunning   time6-8hours

Fully automatic pallet wrapping machines are normally integrated into an automated production line and, to facilitate that integration, our control panels are designed to enable easy interfacing with external conveyor control panels. Touch screen user interfaces are provided for setting wrapping parameters, monitoring progress and diagnosing alarms.

Dryers are mainly used for drying materials with different humidity or particle size in the fields of mineral processing, building materials, metallurgy, chemical industry, food, etc. Dryers have strong adaptability to materials and can dry various materials. Moreover, the equipment is easy to operate, so they are widely used. They can be divided into industrial and civil use. Industrial dryers are also called drying equipment or dryers. The machine is mainly composed of a rotating body, a lifting plate, a rotating device support, and a sealing ring.

The horizontal ring body wrapping machine is a novel wrapping machine specially designed and manufactured for ring-shaped items such as rubber hoses (such as tires, bearings, steel belts, steel wires, steel rings, aluminum strips, etc.). Its advantage is that it is completely It replaces manual winding packaging, has fast packaging speed and easy operation, greatly improves production efficiency and reduces workers' labor intensity. The packaging effect is neat. It can be packaged in multi-layer wrapping paper, which can prevent dust, moisture and protect the surface of the product.

The vertical ring body wrapping machine is a novel wrapping machine specially designed and manufactured for metal ring-shaped items such as steel belts (such as bearings, steel belts, steel wires, steel rings, aluminum belts, etc.). Its advantage is that it is completely It replaces manual winding packaging, has fast packaging speed and easy operation, greatly improves production efficiency and reduces workers' labor intensity. The packaging effect is neat.

Product introductionThe biomass pellet machine is a kind of biomass energy pretreatment equipment. It mainly uses agricultural and forestry processing waste such as wood chips, straw, rice husks, bark and other biomass as raw materials.

Product introductionThe crushing equipment specially used for the production of biomass fuel mainly allows the materials to enter the crushing chamber through the high-speed rotation of the rotor. The materials are crushed through the impact force, shear force and mutual impact force between the materials generated by the high-speed rotating rotor. Crushing, products that reach specified specifications after being screened by the screen. This equipment is mainly used to crush wood shavings, wood chips, crop straw, grain and other materials.