Biomass Pellet Burner-manufacture,factory,supplier from China

Product introductionThe biomass pellet machine is a kind of biomass energy pretreatment equipment. It mainly uses agricultural and forestry processing waste such as wood chips, straw, rice husks, bark and other biomass as raw materials.

Product introductionBiomass fuel is burned in the furnace with reasonable air distribution and gasification components. This secondary air has a very obvious effect. One is to supplement oxygen, and the other is to further strengthen the disturbance of flue gas to make combustion more complete. At present, a large amount of air supplementation is used.

Product introductionGas and air are premixed evenly before entering the combustion head. The combustion head is in the shape of a metal cylinder, and a metal mesh (made of a special alloy) is used to wrap the surface of the metal cylinder. In fully premixed combustion, the flame is only generated on the surface of the burner, and the actual size of the flame is the same as the size of the combustion head. Therefore, the fully premixed burner does not require a large furnace size and can still achieve perfect combustion in a small furnace.

Low carbon and environmental protection: low carbon emissions, renewable fuel, low nitrogen oxide emissions, and no sulfur emissions.Gasification combustion: segmented combustion, low-temperature combustion in the furnace, and secondary high-temperature combustion at the burner.Applicable fuel: The fixed grate is suitable for wood pellets, and the movable grate can be mixed with straw pellets.Widely used: boilers, dryers, hot blast furnaces, kilns, annealing furnaces, incinerators, aluminum rod heating furnaces, etc.High efficiency and energy saving: It saves more than 50% energy compared with

Product introductionOur company has developed a new type of hot blast stove for burning biomass wood chips, bark, straw, etc. It has been continuously improved in practice and is now a mature product.

Product introductionThe gas enters the tube under a certain pressure, escapes through the fire hole, obtains oxygen from the surrounding air, and burns, forming a diffusion flame.Mechanical characteristics(1) Simple structure and convenient manufacturing(2) The combustion is stable and will not backfire; it is easy to ignite and adjust(3) Low-pressure gas (200~400Pa or lower) can be used, and no blowing is required and no power consumption is required.(4) The combustion heat intensity is low, the flame is long, and a larger combustion chamber is required.(5) In order to achieve complete combus

Product introductionThe crushing equipment specially used for the production of biomass fuel mainly allows the materials to enter the crushing chamber through the high-speed rotation of the rotor. The materials are crushed through the impact force, shear force and mutual impact force between the materials generated by the high-speed rotating rotor. Crushing, products that reach specified specifications after being screened by the screen. This equipment is mainly used to crush wood shavings, wood chips, crop straw, grain and other materials.

Product introductionThe star-shaped unloader is used to be installed at the discharge port of the unloader that works under negative pressure. The upper part receives the material discharged by the unloader. It relies on the rotating impeller to transport the material and is also responsible for sealing to prevent During the pneumatic conveying process, air is sucked in from the discharge port to ensure the normal discharge of the unloader. As a special unloading equipment, it plays a great role in cleaning and cleaning work.

1. IntroductionThe paper kicker (also known as the paper pusher) is suitable for the paper roll automatic conveyor line in the completion section of the papermaking workshop. It can kick the paper roll from the V-shaped chain conveyor; it can also catch the rolled paper roll to make the paper roll Slowly stop and use as a buffer to complete the transposition of the paper roll on the production line. It can also be used for transposition of non-automatic online and similar items in other industries. 2.

ModelLY- P500Wrapping   sizediameter(200-800mm);   width(200-500mm)Packing   efficiency20-40   rolls/hourTurntable   speed0-12   variable speed by frequency changerTurntable   height700mmTurntable   capacity200kgMachine   shape size1460mm×840mm×1492mmPower   supply0.8kw/AC380VFilm   carriagePre-stretch   film carriage, up to 250%,automatic feeding filmControl   systemPLC,   wrapping layer, wrapping times is adjustable

50CM stretch film, manual film pulling device, film winding device, non-slip setting, save time and laborEasy to disassemble, easy to useRubber gloves are slip resistant and durableAccording to the length of the stretch, easy to useIt’s easier to pack than to grindMaterial:PPWeight:Around   0.08kg/pairType：   Usage:Stretch   Film   Packaging FilmApplication:   Feature:Prevent   any potential damage   Moisture proofInner   diameter:76mm,customizedColor:   Enviromental protection:Clear,   Green, Yellow, Red, Blue, etc non-toxic

Material: PE Metallocene: Available(10%-25%) Type：Usage: Stretch FilmPackaging Film Application: Feature: Prevent any potential damageMoisture proof Hardness: Soft Processing: Multiple Extrusion Color:Enviromental protection: Clear, Green, Yellow, Red, Blue, etc non-toxic Thickness: 15mic〜38mic, Customized Width: 100mm-1500mm, Customized Weight(G.W.): 2〜30kg,Customized Length: Customi zed: Customized Elongation at break: 400%-500% Tear strength: High Paper Core: 3 inch Paper Core Weight: 0.3kg〜1.1kg Packing: 1/4/6 rolls

Pre-stretch winding machine with slope is suitable for container transportation and bulk packaging of goods. It is widely used in glass products, hardware tools, electrical appliances and electronics, papermaking, ceramics, chemicals, food and beverages, building materials and many other industries. Its main performance has been further optimized. The side design of the mold frame makes it have a higher draw ratio, stronger ductility, lower film narrowing rate, stronger safety, and less loss during transportation.

The stopping sorting deck is composed of 9\12 stop units, working width: 3600mm, 4800mm, stop unit width: B=400mm, stop unit lifting is realized by pneumatic tires.The stop plate adopts an anti-pinch structure.The stop plate panel is electroplated.The front of each unit must be marked with Arabic numerals in orderFabricated steel structureInstalled in a concrete slopeEquipped with an air control box, the air table is lifted, and the pneumatic control valve is installed in the air control box, which is convenient for maintenance.

This system is used in the transportation of jumbo tissue roll.Includes main machine frame, wheels, driving unit motor (brake, VFD) geared box, as well as the accessories.Railway with wireless power systemTotal length: 200mm*2 parallel in one direction and 15m*2 in cross directionWireless power supply system to be installed underground.Chain rollers installed with bearing inside, No oil and No contamination on paper rolls.Heavy duty steel structures, modular design, equipped with vertical shaft driving gear reducer.Tensioner adjusting device & lubrication can be operated on floor level, ea

Product introductionPP spray tower is also called PP washing tower, acid mist purification tower - acid-base waste gas treatment equipment; working principle of spray tower: waste gas is introduced into the purification tower from the air duct, and passes through the packing layer. The waste gas and the absorption liquid are fully gas-liquid two-phase. After contact absorption and neutralization reaction, the exhaust gas is purified, dehydrated and defogged by the demister plate, and then discharged into the atmosphere by the fan.

1. Machine main frameGantry type frame, made of square steel tube, material: Q235 steel.Driving motor base is installed on the frame.The rotary arm is fixed on the frame connecting with slew bearing.Frame size: (to be confirmed by drawing)2. Driving device for rotary armFrequency control motor with brake Brand of motor: Local famous brand, Power rated: 1.5KW   Rotary arm speed: n=25rpm (frequency motor with brake)3.

1 Specification and features Technical parameter:  Max load size (mm): 1200 (L) ×1100(W) ×1600(H). Packing efficiency: 20-40 loads / hour. Arm speed: 3-15rpm. Power supply: 1.3KW 220V 50HZ 1Phase. (Device plugs can be changed to suit the needs of your region) Max load capacity: floor capacityPallet Wrapping Machine Arm DriveSlewing Bearing drive system. Soft start /stop. Heavy Structural steel Frame construction.

Rotary ring wrapping machine:Technology data:Load   size(mm)L1200×W1000×H1200-1600   mmConveyor   height 580 mm Conveyor effective   width1200mmPacking   efficiency50-65 loads   / hourRotary ring   speed0-45rpmPower supply380V 50Hz   3P   5 kwMax load   capacity2000kgsWorking   ambianceIndoor,   normal temperatureSupply scopeMachine main frame                              Gantry type frame, made of square steel tube, material: Q235 steel.Driving

产品介绍秸秆捆回转切割机由框架装置、旋切装置、送料装置和过载保护装置组成。该机结构简单，机身采用钢板，经久耐用，移动方便。送料装置采用外齿轮链旋转，无死角，效率高。旋转切割转子具有锋利的刀片，可以处理各种不同厚度、长度和含水量的捆包和捆包。树枝断裂率高，可以抛出10米远，避免了受伤等事故，保证了操作人员的人身安全。机械特性1、大直径送料：送料直径有2000mm、2500mm、3000mm三种规格可供选择。大直径便于给料堆或成捆的物料，如堆秸秆、牧草、或捆秸秆和牧草。间歇进料、连续破碎、喷射出料的进料口高度约为1米。由于其直径大、高度高，一次进料可进料量大，进料口的旋转带动物料移动到破碎机的转子上，使物料连续破碎，实现间歇进料，降低工人进料强度。破碎后的物料随转子旋转，在离心力的作用下高速从卸料口飞出，节省了输送设备。2、一体化切碎破碎设备的核心部件是安装在破碎转子上的圆盘形刀具和锤子。在操作过程中，大体积的材料被圆盘形切割机切割成小体积，然后用锤子破碎。这种切碎和破碎的工作方法提高了破碎效率。3、核心部件采用耐磨坚韧合金制成。设备的核心部件主要是岩石切割机和锤子。这些零件由具有良好韧性和较强抗冲击性的合金制成。圆盘形刀具具有高硬度和耐磨性，锤子的两个工作边缘焊接了超耐磨硬质合金材料，大大提高了其使用寿命。

Turntable diameter: 3000mm.Equipped with big diameter slew bearing for heavy duty bearing, stable run ability and long durability. Rotary turntable motor: SEW brand. V type slat conveyor installed on Turntable, single row V-slat conveyor;Driving   speed:18   m/min (Speed adjustable, Siemens inverter)Chain   pitch:P =   63.5 mmSlat   width:B =   55 mmSlat   length:L =   250 mmThickness:S =   10 mm carbon steelSlat   bearing:China   brandGear   motor:SEW   brand

Machine Description:The fixed paper stopper is composed of a plate type.Spray paint on the surface of the fixed plate.Fabricated steel structure.Install in the pit.Working width: 3600mm\4800mm.

Paper Core Inner Dia.51mm51mm76mmPaper Core Inner Dia.460mm520mm520mmFilm Width420-450mm500mmMachine Weight0.42KG0.45KGMachine Height580mm620mmMachine Width220mmStreching Rate10-20%

1. Purpose: High-temperature fans are suitable for working under non-corrosive and high-temperature conditions.2. Form: This fan is made of double-suction type. Viewed from one end of the motor, the impeller can be made to rotate forward or counter-rotate. The air inlet of the fan is at an angle of 105° with the horizontal line, and the air outlet is at an angle of 90° with the horizontal line.