Corner projecting-manufacture,factory,supplier from China

Integrated pallet edge corner protector applicator with side welding vertical type strapping systemPacking system composition1. Movable pallet top angle corner applicator;2. Side welding Vertical type strapping machine;3.

The applicator can sense the position of the pallet, and then adjust the position of the installation. The working center should be same as the wrapper.Auto sense the paper board quantity and alarm when lack of material, so that the paper boards can be feed manually.The paper board should be in same level without angle.Paper corner magazine 3pcs for each applicator, feed the paper board vertically. The device should be connected with the main wrapper so that whole system work automatically.The buyer should provide the exact specification of the paper board for confirmation.

1.Applicablepalletsize:L1000~1200*W1000~1200*H120~150mm2.Applicablepackagesize:350~2000mm(includingpallet)3.Applicableproductweight:Groundbearing.4.Applicablepowersupply:3-phase380V50HZ2KW5.Applicableair:5kgf/cm2,450NL/min6.Singlestrappingspeed:PP20seconds/strap,excludingconveying,hostlifting,positioningtime7.PPstrap:width15~16mm,thickness0.7-0.8mm,skewness<30mm,Thecustomerprovidesthetestmachinestrapbeforeshipment.8.Hotstickingpart:sideface,hotmelttype9.Packingmethod:movementoftheentiremovement(250mmlength)10.Numberofstraps:1~6optional(thestrappositionissetbythecontrolpanel)11.Theloweststra

Three-drum dryer is a common industrial drying equipment, widely used in food, chemical, agricultural products and other industries.Three-pass dryer is a high-efficiency combined three-drum dryer. Large three-drum dryers are usually 6 to 7 meters long and are divided into two structural forms: straight and conical. The flow of materials is driven by the blades (i.e. guide plates) in the drum that rotate with the drum to move the materials forward. It is suitable for straight or conical structures.

The drum dryer has high thermal efficiency and significant energy saving effect. After testing, the thermal efficiency greatly exceeds the level of about 50% of traditional single-cylinder dryers. After the equipment was put into operation, the coal-saving effect was remarkable. The drying mechanism is scientific and reasonable.

产品介绍专门用于生产生物质燃料的破碎设备主要允许物料通过转子的高速旋转进入破碎室。物料通过高速旋转转子产生的冲击力、剪切力和物料之间的相互冲击力进行破碎。破碎，经筛分后达到指定规格的产品。本设备主要用于粉碎刨花、木屑、农作物秸秆、粮食等物料。可根据不同行业不同客户的具体原料条件选择不同的筛网，实现客户对成品的需求。机械特性1、一整套宽幅粉碎机包括进料带-给料机-主机-风机风道-除尘风道-sakron-风机-布袋除尘器-闭风机-U型卸料龙-卸料带式输送机-电控柜（带软启动）2、破碎机转子在原有高效破碎机的基础上加大，增加破碎腔有效工作容积，能耗低，产量高。3、破碎机转子锤的布置更合理，每组锤子之间的距离更短，物料损失率更低，破碎效率更高4、筛网采用双侧卸料，设计面积利用率同比提高30%，占整个转子周长的85%。卸料区利用率更高，产量更大。5、破碎机底部采用双螺旋出料，无死角，出料更顺畅，生产能力更高。6、配备旋风除尘、布袋除尘相结合，粉尘处理效果更清洁，生产环境更环保。7、锤子两侧均可直接更换和拆卸，无需拆卸设备。比更换传统多功能破碎机的锤头更方便快捷，维护时间和成本更低。8、全新的屏幕固定方式，外置可动手柄，拆卸屏幕更方便快捷，设备维护更方便。9、破碎腔两侧均装有行程开关，保证设备在生产过程中的安全。

Product introductionFour-process drum dryer. During the drying process, heat is transferred from the inner wall of the drum to its outer wall, passing through the dried food materials attached to the outer wall of the drum, evaporating the moisture on the materials. It is a continuous drying process. Production machinery. The four-process drum dryer is mainly used in mineral processing, building materials, metallurgy, chemical industry and other departments to dry materials with a certain humidity or particle size.

Model No.LY02Paper Core Inner Dia.76mmMachine Weight0.193kg for 2 piecesMachine Height57mmMachine Width115mm

1. Purpose: High-temperature fans are suitable for working under non-corrosive and high-temperature conditions.2. Form: This fan is made of double-suction type. Viewed from one end of the motor, the impeller can be made to rotate forward or counter-rotate. The air inlet of the fan is at an angle of 105° with the horizontal line, and the air outlet is at an angle of 90° with the horizontal line.

Product introductionThe so-called vacuum drying is to heat and dry the dry materials under vacuum conditions. If a vacuum pump is used to extract air and moisture, the drying speed will be accelerated.Mechanical characteristicsThe boiling point of the material solution decreases under vacuum. Increase the heat transfer driving force of the evaporator.

Product introductionThe gas enters the tube under a certain pressure, escapes through the fire hole, obtains oxygen from the surrounding air, and burns, forming a diffusion flame.Mechanical characteristics(1) Simple structure and convenient manufacturing(2) The combustion is stable and will not backfire; it is easy to ignite and adjust(3) Low-pressure gas (200~400Pa or lower) can be used, and no blowing is required and no power consumption is required.(4) The combustion heat intensity is low, the flame is long, and a larger combustion chamber is required.(5) In order to achieve complete combus

Low carbon and environmental protection: low carbon emissions, renewable fuel, low nitrogen oxide emissions, and no sulfur emissions.Gasification combustion: segmented combustion, low-temperature combustion in the furnace, and secondary high-temperature combustion at the burner.Applicable fuel: The fixed grate is suitable for wood pellets, and the movable grate can be mixed with straw pellets.Widely used: boilers, dryers, hot blast furnaces, kilns, annealing furnaces, incinerators, aluminum rod heating furnaces, etc.High efficiency and energy saving: It saves more than 50% energy compared with

Product introductionPP spray tower is also called PP washing tower, acid mist purification tower - acid-base waste gas treatment equipment; working principle of spray tower: waste gas is introduced into the purification tower from the air duct, and passes through the packing layer. The waste gas and the absorption liquid are fully gas-liquid two-phase. After contact absorption and neutralization reaction, the exhaust gas is purified, dehydrated and defogged by the demister plate, and then discharged into the atmosphere by the fan.

Product introductionGas and air are premixed evenly before entering the combustion head. The combustion head is in the shape of a metal cylinder, and a metal mesh (made of a special alloy) is used to wrap the surface of the metal cylinder. In fully premixed combustion, the flame is only generated on the surface of the burner, and the actual size of the flame is the same as the size of the combustion head. Therefore, the fully premixed burner does not require a large furnace size and can still achieve perfect combustion in a small furnace.

1. This machine is set to save power, save energy and protect the environment.2. The thermal insulation material is aluminum silicate, which has better thermal insulation performance than rock wool. Aluminum silicate has a high density and a good thermal insulation effect.3. Power supply optional: 380V/220V/50HZ4. The heating time is about 20 minutes according to the moisture content of the material. The temperature rises quickly, saving time and allowing the equipment to be put into work as soon as possible.5.

Product introductionThe star-shaped unloader is used to be installed at the discharge port of the unloader that works under negative pressure. The upper part receives the material discharged by the unloader. It relies on the rotating impeller to transport the material and is also responsible for sealing to prevent During the pneumatic conveying process, air is sucked in from the discharge port to ensure the normal discharge of the unloader. As a special unloading equipment, it plays a great role in cleaning and cleaning work.

The emergence of mobile wood chip crusher has brought great convenience to the wood processing industry. Wood crusher integrates cutting and crushing, and is mainly used for crushing various branches, fruit branches, poplar trees, wood boards, strips, scraps and other materials.First of all, it uses a diesel engine as a power source, which has the characteristics of high mobility and flexibility.

Product introductionThe crushing equipment specially used for the production of biomass fuel mainly allows the materials to enter the crushing chamber through the high-speed rotation of the rotor. The materials are crushed through the impact force, shear force and mutual impact force between the materials generated by the high-speed rotating rotor. Crushing, products that reach specified specifications after being screened by the screen. This equipment is mainly used to crush wood shavings, wood chips, crop straw, grain and other materials.

Product introductionSeries use of cyclone dust collectors and other dust collectors 1. The dust removal efficiency of cyclone dust collectors generally increases with the increase of dust load, and if the cyclone dust collector is well designed, it can be used to collect any amount of dust that can be transported by air flow materials. Therefore, cyclones are often used as first-stage dust collectors to take advantage of their ability to handle high dust loads. The most common configuration is a cyclone followed by a fabric, electrostatic or wet dust collector.2.

Shakron dust collector is a type of dust removal device. The dust removal mechanism is to make the dust-containing air flow rotate, use centrifugal force to separate the dust particles from the air flow and capture them on the wall, and then use gravity to make the dust particles fall into the ash hopper. It consists of an intake pipe, an exhaust pipe, a cylinder, a cone and an ash hopper. The Shakron dust collector has a simple structure, is easy to manufacture, install and maintain, and has low equipment investment and operating costs.

The shell is made of Q235 carbon steel, which has strong high temperature resistance and corrosion resistance. It has a built-in metal impeller and sealing disc.It has stable operation and avoids leakage of special gases. It can be customized according to customer requirements and optimized for free.

Product introductionThe centrifugal fan is a machine that relies on input mechanical energy to increase the gas pressure and discharge the gas. It is a driven fluid machine. Centrifugal fans are widely used in ventilation, dust removal and cooling of factories, mines, tunnels, cooling towers, vehicles, ships and buildings; ventilation and draft induction in boilers and industrial furnaces; cooling and cooling in air conditioning equipment and household appliances.

This machine has the advantages of easy entry and exit of packaged objects, wide range of winding and packaging, easy operation and convenient adjustment. Products after winding packaging can reduce the surface wear of the product, improve sealing, and facilitate product storage and transportation. After winding and packaging, not only the product is generous, but also has good moisture-proof, dust-proof, rust-proof, anti-aging, anti-accidental damage, etc. This machine has the advantages of high stability, fast packaging speed, wide packaging range, and easy operation.

The self-propelled winding machine uses LLDPE stretch film as the main material to wrap large and heavy machines or art products to prevent the goods from being scattered and collapsed, and can protect the goods from dust, moisture and damage. , widely used in printing, papermaking, chemical, food, logistics and other industries. The film-coated products are compact, strong and beautiful in appearance.1. Automatic walking pre-stretching and winding operation, can work continuously for 8 hours2.