Drying Equipment-manufacture,factory,supplier from China

Product introductionThe dehydration dryer is a special equipment developed based on the traditional mesh belt dryer. It has strong pertinence, practicality and high energy efficiency. It is widely used for dehydration and drying of various regional and seasonal vegetables and fruits. . Such as: garlic slices, pumpkin, konjac, white radish, yam, bamboo shoots, etc. Since 1993, our factory began to jointly develop and produce the first domestic mesh belt vegetable dryer for pumpkin dehydration and drying with the Chinese Academy of Sciences.

Product introduction：Small and medium-sized dryers have strong adaptability to materials and can dry a variety of materials. The machines and equipment are easy to use and reliable, so they are widely used.Mechanical characteristicsThe small and medium-sized dryer is a new type of micro multi-purpose dryer that is suitable for various drying tasks, such as various agricultural and animal husbandry crops, sand, gravel, fly ash, etc.

1. This machine is set to save power, save energy and protect the environment.2. The thermal insulation material is aluminum silicate, which has better thermal insulation performance than rock wool. Aluminum silicate has a high density and a good thermal insulation effect.3. Power supply optional: 380V/220V/50HZ4. The heating time is about 20 minutes according to the moisture content of the material. The temperature rises quickly, saving time and allowing the equipment to be put into work as soon as possible.5.

Product Details：The three-cylinder dryer production line consists of: heat source system, feeding system, conveyor belt, feeding chute, drying equipment, discharge belt, vibrating classification screen, dust removal system, induced draft fan, electronic control system and other equipment. The sand is sent to the hopper by a belt conveyor or bucket elevator, and then enters the feeding end through the feeding pipe through the feeding machine of the hopper.

Product introductionThe so-called vacuum drying is to heat and dry the dry materials under vacuum conditions. If a vacuum pump is used to extract air and moisture, the drying speed will be accelerated.Mechanical characteristicsThe boiling point of the material solution decreases under vacuum. Increase the heat transfer driving force of the evaporator.

The drum dryer has high thermal efficiency and significant energy saving effect. After testing, the thermal efficiency greatly exceeds the level of about 50% of traditional single-cylinder dryers. After the equipment was put into operation, the coal-saving effect was remarkable. The drying mechanism is scientific and reasonable.

Product introductionCow dung dryers (chicken dung dryers, duck dung dryers, horse dung dryers) are suitable for large, medium and small farms and areas with relatively developed breeding industries. According to the requirements of the drying products, different methods can be used. heat source.

Dryers are mainly used for drying materials with different humidity or particle size in the fields of mineral processing, building materials, metallurgy, chemical industry, food, etc. Dryers have strong adaptability to materials and can dry various materials. Moreover, the equipment is easy to operate, so they are widely used. They can be divided into industrial and civil use. Industrial dryers are also called drying equipment or dryers. The machine is mainly composed of a rotating body, a lifting plate, a rotating device support, and a sealing ring.

Product introductionFour-process drum dryer. During the drying process, heat is transferred from the inner wall of the drum to its outer wall, passing through the dried food materials attached to the outer wall of the drum, evaporating the moisture on the materials. It is a continuous drying process. Production machinery. The four-process drum dryer is mainly used in mineral processing, building materials, metallurgy, chemical industry and other departments to dry materials with a certain humidity or particle size.

Three-drum dryer is a common industrial drying equipment, widely used in food, chemical, agricultural products and other industries.Three-pass dryer is a high-efficiency combined three-drum dryer. Large three-drum dryers are usually 6 to 7 meters long and are divided into two structural forms: straight and conical. The flow of materials is driven by the blades (i.e. guide plates) in the drum that rotate with the drum to move the materials forward. It is suitable for straight or conical structures.

Product introductionDuring the drying process, heat is transferred from the inner wall of the drum to its outer wall, passing through the dried food materials attached to the outer wall of the drum, evaporating the moisture on the materials. It is a continuous drying production machine.The dryer is mainly used in mineral processing, building materials, metallurgy, chemical industry and other departments to dry materials with a certain humidity or particle size. The dryer has strong adaptability to materials and can dry a variety of materials.

Product introductionThe flame retardant spray tower is a device that implements absorption operations. Acid mist purification tower, also known as acid mist tower or purification tower, plays the role of removing harmful gases in exhaust gas. The production process performed by electroplating equipment can be divided into three links, namely pre-plating surface treatment, electroplating treatment and post-plating treatment. Electroplating equipment refers to the above-mentioned production equipment that directly processes parts.Mechanical characteristics1.

Product introductionThe star-shaped unloader is used to be installed at the discharge port of the unloader that works under negative pressure. The upper part receives the material discharged by the unloader. It relies on the rotating impeller to transport the material and is also responsible for sealing to prevent During the pneumatic conveying process, air is sucked in from the discharge port to ensure the normal discharge of the unloader. As a special unloading equipment, it plays a great role in cleaning and cleaning work.

Product introductionThe crushing equipment specially used for the production of biomass fuel mainly allows the materials to enter the crushing chamber through the high-speed rotation of the rotor. The materials are crushed through the impact force, shear force and mutual impact force between the materials generated by the high-speed rotating rotor. Crushing, products that reach specified specifications after being screened by the screen. This equipment is mainly used to crush wood shavings, wood chips, crop straw, grain and other materials.

Shakron dust collector is a type of dust removal device. The dust removal mechanism is to make the dust-containing air flow rotate, use centrifugal force to separate the dust particles from the air flow and capture them on the wall, and then use gravity to make the dust particles fall into the ash hopper. It consists of an intake pipe, an exhaust pipe, a cylinder, a cone and an ash hopper. The Shakron dust collector has a simple structure, is easy to manufacture, install and maintain, and has low equipment investment and operating costs.

Product introductionPP spray tower is also called PP washing tower, acid mist purification tower - acid-base waste gas treatment equipment; working principle of spray tower: waste gas is introduced into the purification tower from the air duct, and passes through the packing layer. The waste gas and the absorption liquid are fully gas-liquid two-phase. After contact absorption and neutralization reaction, the exhaust gas is purified, dehydrated and defogged by the demister plate, and then discharged into the atmosphere by the fan.

Product introductionThe centrifugal fan is a machine that relies on input mechanical energy to increase the gas pressure and discharge the gas. It is a driven fluid machine. Centrifugal fans are widely used in ventilation, dust removal and cooling of factories, mines, tunnels, cooling towers, vehicles, ships and buildings; ventilation and draft induction in boilers and industrial furnaces; cooling and cooling in air conditioning equipment and household appliances.

Product introductionThe biomass pellet machine is a kind of biomass energy pretreatment equipment. It mainly uses agricultural and forestry processing waste such as wood chips, straw, rice husks, bark and other biomass as raw materials.

Firstly. What is a bamboo chip machine?A bamboo chip machine is a machine specially used to cut bamboo into slices. It is one of the indispensable equipment in the bamboo processing industry.Second. Bamboo chip machine varietiesAccording to different working methods and uses, bamboo chip machines can be divided into the following varieties:1. Manual bamboo chip machineA manual bamboo chip machine is a simple mechanical equipment, mainly composed of a cutter, a support frame and a manual control device. It is suitable for small-scale bamboo processing, with simple operation and low cost.2.

Case sealer machine is mainly suitable for sealing and packaging of cartons. It can be used as a stand-alone machine or in conjunction with an assembly line. It can be used as a single carton or in combination with carton forming and opening machines, cartoning machines, and labeling machines. Machines, strapping machines, pallet stackers, conveyors and other equipment are used in conjunction with packaging lines, and are necessary equipment for packaging line operations. The carton sealing machine is the agent of Jinan.

The low price of the upper and lower word carton sealing machine is mainly suitable for carton sealing and packaging. It can be used as a stand-alone machine or in conjunction with the assembly line. It can be used as a single carton or in combination with carton forming and unpacking machines, cartoning machines, and labeling machines. Machines, strapping machines, pallet stackers (palletizing robots), conveyors and other equipment are used in a packaging assembly line and are necessary equipment for packaging assembly line operations.

机械特性1.破碎细度高。多功能破碎机可以将各种物料破碎成非常细小的颗粒，从而适应各种应用。2.功率大。多功能破碎机具有强大的动力装置，可在短时间内破碎大量物料。3.结构紧凑。多功能破碎机外形紧凑，占地面积小，安装使用方便。4.易于清洁。多功能破碎机内部结构简单，拆装清洗方便，保证了工作效率和产品质量。5.适用于各种领域。多功能破碎机可应用于各种工业领域，包括食品、化工、制药等行业。应用范围主要适用于生物燃料、发电、饲料、有机肥、中药材、育种、化工等行业。售后服务承诺：1、供方在交货时，应向买方提供设备使用说明书（电气原理图、电路图等）以及安装维护说明书和装箱单。2.设备有一年保修和终身维护。3、保修期内，对于非人为因素造成的设备故障，当设备出现故障时，卖方将在4小时内做出响应，并提供技术支持，尽快解决问题。在保修期内，我们负责免费提供损坏的零件和配件。保修期过后，只收取配件费用。保持联系如果您有任何问题，请与我们联系，我会尽快与您联系。张旭东山东溧阳智能装备有限公司 （Shandong Liyang Intelligent Equipment Co.， Ltd）M.P.和WhatsApp：0086-18653186367电子邮件： marketing@liyangzn.com地址：山东省济南市章丘区双山街道大佑中心2-203铺 250200

Drip irrigation pipe packaging machine, also called drip irrigation pipe packaging machine, scientific name is cylindrical welding packaging machine. It is an auxiliary equipment for drip irrigation tape equipment. It is mainly suitable for packaging cylindrical objects, especially suitable for closed wrapping of small cylindrical goods, such as rolled drip irrigation pipes, such as: drip irrigation pipe reels, coils, rubber products and packaging of small paper plates, etc.

Wrapping size: Diameter(200-600mm)  Width(200-500mm)Packing efficiency: 20-40 rolls/hourTurntable speed:0-12 rpmTurntable height:700mmTurntable capacity:80kgMachine size: 1460mmx840mmx1492mmPower supply:0.8kw/AC 220VMotor、electrical equipment 、pneumatic ：China brand