Dust Removal Equipment-manufacture,factory,supplier from China

Shakron dust collector is a type of dust removal device. The dust removal mechanism is to make the dust-containing air flow rotate, use centrifugal force to separate the dust particles from the air flow and capture them on the wall, and then use gravity to make the dust particles fall into the ash hopper. It consists of an intake pipe, an exhaust pipe, a cylinder, a cone and an ash hopper. The Shakron dust collector has a simple structure, is easy to manufacture, install and maintain, and has low equipment investment and operating costs.

Product introductionSeries use of cyclone dust collectors and other dust collectors 1. The dust removal efficiency of cyclone dust collectors generally increases with the increase of dust load, and if the cyclone dust collector is well designed, it can be used to collect any amount of dust that can be transported by air flow materials. Therefore, cyclones are often used as first-stage dust collectors to take advantage of their ability to handle high dust loads. The most common configuration is a cyclone followed by a fabric, electrostatic or wet dust collector.2.

Bag dust collector is a dry dust filtering device. It is suitable for capturing fine, dry, non-fibrous dust. The filter bag is made of textile filter cloth or non-woven felt, and uses the filtration effect of fiber fabric to filter dust-containing gas. When the dust-containing gas enters the bag dust collector, the dust with large particles and heavy specific gravity will be removed due to gravity. It will settle down and fall into the ash hopper. When the gas containing fine dust passes through the filter material, the dust is blocked, thus the gas can be purified.1.

Product introductionThe centrifugal fan is a machine that relies on input mechanical energy to increase the gas pressure and discharge the gas. It is a driven fluid machine. Centrifugal fans are widely used in ventilation, dust removal and cooling of factories, mines, tunnels, cooling towers, vehicles, ships and buildings; ventilation and draft induction in boilers and industrial furnaces; cooling and cooling in air conditioning equipment and household appliances.

Product Details：The three-cylinder dryer production line consists of: heat source system, feeding system, conveyor belt, feeding chute, drying equipment, discharge belt, vibrating classification screen, dust removal system, induced draft fan, electronic control system and other equipment. The sand is sent to the hopper by a belt conveyor or bucket elevator, and then enters the feeding end through the feeding pipe through the feeding machine of the hopper.

The shell is made of Q235 carbon steel, which has strong high temperature resistance and corrosion resistance. It has a built-in metal impeller and sealing disc.It has stable operation and avoids leakage of special gases. It can be customized according to customer requirements and optimized for free.

Product introductionThe flame retardant spray tower is a device that implements absorption operations. Acid mist purification tower, also known as acid mist tower or purification tower, plays the role of removing harmful gases in exhaust gas. The production process performed by electroplating equipment can be divided into three links, namely pre-plating surface treatment, electroplating treatment and post-plating treatment. Electroplating equipment refers to the above-mentioned production equipment that directly processes parts.Mechanical characteristics1.

Product introductionThe crushing equipment specially used for the production of biomass fuel mainly allows the materials to enter the crushing chamber through the high-speed rotation of the rotor. The materials are crushed through the impact force, shear force and mutual impact force between the materials generated by the high-speed rotating rotor. Crushing, products that reach specified specifications after being screened by the screen. This equipment is mainly used to crush wood shavings, wood chips, crop straw, grain and other materials.

LY-1800YB/F, this model is a cantilever wrapping packaging machine with an integrated packaging equipment that adds a laminating function. It can complete the two functions of wrapping and top film covering, and can form a five-sided package that is dust-proof, moisture-proof, and rain-proof. Fully unmanned, high efficiency and low cost.

1. This machine is set to save power, save energy and protect the environment.2. The thermal insulation material is aluminum silicate, which has better thermal insulation performance than rock wool. Aluminum silicate has a high density and a good thermal insulation effect.3. Power supply optional: 380V/220V/50HZ4. The heating time is about 20 minutes according to the moisture content of the material. The temperature rises quickly, saving time and allowing the equipment to be put into work as soon as possible.5.

Product introductionThe star-shaped unloader is used to be installed at the discharge port of the unloader that works under negative pressure. The upper part receives the material discharged by the unloader. It relies on the rotating impeller to transport the material and is also responsible for sealing to prevent During the pneumatic conveying process, air is sucked in from the discharge port to ensure the normal discharge of the unloader. As a special unloading equipment, it plays a great role in cleaning and cleaning work.

The drum dryer has high thermal efficiency and significant energy saving effect. After testing, the thermal efficiency greatly exceeds the level of about 50% of traditional single-cylinder dryers. After the equipment was put into operation, the coal-saving effect was remarkable. The drying mechanism is scientific and reasonable.

Dryers are mainly used for drying materials with different humidity or particle size in the fields of mineral processing, building materials, metallurgy, chemical industry, food, etc. Dryers have strong adaptability to materials and can dry various materials. Moreover, the equipment is easy to operate, so they are widely used. They can be divided into industrial and civil use. Industrial dryers are also called drying equipment or dryers. The machine is mainly composed of a rotating body, a lifting plate, a rotating device support, and a sealing ring.

Product introductionPP spray tower is also called PP washing tower, acid mist purification tower - acid-base waste gas treatment equipment; working principle of spray tower: waste gas is introduced into the purification tower from the air duct, and passes through the packing layer. The waste gas and the absorption liquid are fully gas-liquid two-phase. After contact absorption and neutralization reaction, the exhaust gas is purified, dehydrated and defogged by the demister plate, and then discharged into the atmosphere by the fan.

产品介绍更灵活的切片设备使用柴油发动机作为动力，可以拖曳进行户外生产。具有较强的流动性和较好的流量生产效果。主要适用于粉碎树枝、树干、竹子、麻秆、烟秆、秸秆等物料。，粉碎物料为1-3cm，厚度为5mm。是处理废木料的较好选择。机械特性1.柴油机为动力，可移动，灵活性高2.进料口尺寸大，适用于各种物料。3、进料辊前反可调，防止物料堵塞。4.采用定动刀组合，有效控制物料细度应用范围主要适用于粉碎树枝、树干、竹竿、麻竿、烟竿、秸秆等物料售后服务承诺：1、供方在交货时，应向买方提供设备使用说明书（电气原理图、电路图等）以及安装维护说明书和装箱单。2、设备保修一年，终身维护。3、保修期内，对于非人为因素造成的设备故障，当设备出现故障时，卖方将在4小时内做出响应，并提供技术支持，尽快解决问题。在保修期内，我们负责免费提供损坏的零件和配件。保修期过后，只收取配件费用。 取得联系如果您有任何问题，请与我们联系，我会尽快与您联系。张旭东山东溧阳智能装备有限公司 （Shandong Liyang Intelligent Equipment Co.， Ltd）手机和WhatsApp：0086-18653186367电子邮件： marketing@liyangzn.com地址：山东省济南市张丘区双山街道大友中心2-203号铺 250200

Product introductionThe dehydration dryer is a special equipment developed based on the traditional mesh belt dryer. It has strong pertinence, practicality and high energy efficiency. It is widely used for dehydration and drying of various regional and seasonal vegetables and fruits. . Such as: garlic slices, pumpkin, konjac, white radish, yam, bamboo shoots, etc. Since 1993, our factory began to jointly develop and produce the first domestic mesh belt vegetable dryer for pumpkin dehydration and drying with the Chinese Academy of Sciences.

Three-drum dryer is a common industrial drying equipment, widely used in food, chemical, agricultural products and other industries.Three-pass dryer is a high-efficiency combined three-drum dryer. Large three-drum dryers are usually 6 to 7 meters long and are divided into two structural forms: straight and conical. The flow of materials is driven by the blades (i.e. guide plates) in the drum that rotate with the drum to move the materials forward. It is suitable for straight or conical structures.

Firstly. What is a bamboo chip machine?A bamboo chip machine is a machine specially used to cut bamboo into slices. It is one of the indispensable equipment in the bamboo processing industry.Second. Bamboo chip machine varietiesAccording to different working methods and uses, bamboo chip machines can be divided into the following varieties:1. Manual bamboo chip machineA manual bamboo chip machine is a simple mechanical equipment, mainly composed of a cutter, a support frame and a manual control device. It is suitable for small-scale bamboo processing, with simple operation and low cost.2.

Product introduction：Small and medium-sized dryers have strong adaptability to materials and can dry a variety of materials. The machines and equipment are easy to use and reliable, so they are widely used.Mechanical characteristicsThe small and medium-sized dryer is a new type of micro multi-purpose dryer that is suitable for various drying tasks, such as various agricultural and animal husbandry crops, sand, gravel, fly ash, etc.

This machine has the advantages of easy entry and exit of packaged objects, wide range of winding and packaging, easy operation and convenient adjustment. Products after winding packaging can reduce the surface wear of the product, improve sealing, and facilitate product storage and transportation. After winding and packaging, not only the product is generous, but also has good moisture-proof, dust-proof, rust-proof, anti-aging, anti-accidental damage, etc. This machine has the advantages of high stability, fast packaging speed, wide packaging range, and easy operation.

Product introductionThe biomass pellet machine is a kind of biomass energy pretreatment equipment. It mainly uses agricultural and forestry processing waste such as wood chips, straw, rice husks, bark and other biomass as raw materials.

The horizontal winding packaging machine is a winding packaging machine specially customized for industries such as circular cargo coils, stranded wires, tires, and hoses.The advantage is that it replaces manual winding packaging, has fast packaging speed and easy operation, greatly improves production efficiency and reduces labor intensity for workers.Spend. The packaging effect is neat. It can be packaged in multi-layer wrapping paper, which can prevent dust, moisture and protect the surface of the product.

Case sealer machine is mainly suitable for sealing and packaging of cartons. It can be used as a stand-alone machine or in conjunction with an assembly line. It can be used as a single carton or in combination with carton forming and opening machines, cartoning machines, and labeling machines. Machines, strapping machines, pallet stackers, conveyors and other equipment are used in conjunction with packaging lines, and are necessary equipment for packaging line operations. The carton sealing machine is the agent of Jinan.

The top-type pre-stretched film wrapping machine wraps the film around the palletized pallet. After wrapping, it can not only effectively improve the packaging quality of the goods, but also prevent the goods from falling during transfer and transportation, and prevent dust and moisture. Function, while improving work efficiency and optimizing packaging effects. The pneumatic top-pressing wrapping machine is better for film packaging of goods that are easily scattered.