Fixed Drying Room-manufacture,factory,supplier from China

1. This machine is set to save power, save energy and protect the environment.2. The thermal insulation material is aluminum silicate, which has better thermal insulation performance than rock wool. Aluminum silicate has a high density and a good thermal insulation effect.3. Power supply optional: 380V/220V/50HZ4. The heating time is about 20 minutes according to the moisture content of the material. The temperature rises quickly, saving time and allowing the equipment to be put into work as soon as possible.5.

Product introductionThe dehydration dryer is a special equipment developed based on the traditional mesh belt dryer. It has strong pertinence, practicality and high energy efficiency. It is widely used for dehydration and drying of various regional and seasonal vegetables and fruits. . Such as: garlic slices, pumpkin, konjac, white radish, yam, bamboo shoots, etc. Since 1993, our factory began to jointly develop and produce the first domestic mesh belt vegetable dryer for pumpkin dehydration and drying with the Chinese Academy of Sciences.

Product introduction：Small and medium-sized dryers have strong adaptability to materials and can dry a variety of materials. The machines and equipment are easy to use and reliable, so they are widely used.Mechanical characteristicsThe small and medium-sized dryer is a new type of micro multi-purpose dryer that is suitable for various drying tasks, such as various agricultural and animal husbandry crops, sand, gravel, fly ash, etc.

Product introductionThe so-called vacuum drying is to heat and dry the dry materials under vacuum conditions. If a vacuum pump is used to extract air and moisture, the drying speed will be accelerated.Mechanical characteristicsThe boiling point of the material solution decreases under vacuum. Increase the heat transfer driving force of the evaporator.

Product introductionCow dung dryers (chicken dung dryers, duck dung dryers, horse dung dryers) are suitable for large, medium and small farms and areas with relatively developed breeding industries. According to the requirements of the drying products, different methods can be used. heat source.

Product Details：The three-cylinder dryer production line consists of: heat source system, feeding system, conveyor belt, feeding chute, drying equipment, discharge belt, vibrating classification screen, dust removal system, induced draft fan, electronic control system and other equipment. The sand is sent to the hopper by a belt conveyor or bucket elevator, and then enters the feeding end through the feeding pipe through the feeding machine of the hopper.

Product introductionFour-process drum dryer. During the drying process, heat is transferred from the inner wall of the drum to its outer wall, passing through the dried food materials attached to the outer wall of the drum, evaporating the moisture on the materials. It is a continuous drying process. Production machinery. The four-process drum dryer is mainly used in mineral processing, building materials, metallurgy, chemical industry and other departments to dry materials with a certain humidity or particle size.

Machine Description:The fixed paper stopper is composed of a plate type.Spray paint on the surface of the fixed plate.Fabricated steel structure.Install in the pit.Working width: 3600mm\4800mm.

The drum dryer has high thermal efficiency and significant energy saving effect. After testing, the thermal efficiency greatly exceeds the level of about 50% of traditional single-cylinder dryers. After the equipment was put into operation, the coal-saving effect was remarkable. The drying mechanism is scientific and reasonable.

Product introductionDuring the drying process, heat is transferred from the inner wall of the drum to its outer wall, passing through the dried food materials attached to the outer wall of the drum, evaporating the moisture on the materials. It is a continuous drying production machine.The dryer is mainly used in mineral processing, building materials, metallurgy, chemical industry and other departments to dry materials with a certain humidity or particle size. The dryer has strong adaptability to materials and can dry a variety of materials.

Low carbon and environmental protection: low carbon emissions, renewable fuel, low nitrogen oxide emissions, and no sulfur emissions.Gasification combustion: segmented combustion, low-temperature combustion in the furnace, and secondary high-temperature combustion at the burner.Applicable fuel: The fixed grate is suitable for wood pellets, and the movable grate can be mixed with straw pellets.Widely used: boilers, dryers, hot blast furnaces, kilns, annealing furnaces, incinerators, aluminum rod heating furnaces, etc.High efficiency and energy saving: It saves more than 50% energy compared with

Dryers are mainly used for drying materials with different humidity or particle size in the fields of mineral processing, building materials, metallurgy, chemical industry, food, etc. Dryers have strong adaptability to materials and can dry various materials. Moreover, the equipment is easy to operate, so they are widely used. They can be divided into industrial and civil use. Industrial dryers are also called drying equipment or dryers. The machine is mainly composed of a rotating body, a lifting plate, a rotating device support, and a sealing ring.

Three-drum dryer is a common industrial drying equipment, widely used in food, chemical, agricultural products and other industries.Three-pass dryer is a high-efficiency combined three-drum dryer. Large three-drum dryers are usually 6 to 7 meters long and are divided into two structural forms: straight and conical. The flow of materials is driven by the blades (i.e. guide plates) in the drum that rotate with the drum to move the materials forward. It is suitable for straight or conical structures.

1. Machine main frameGantry type frame, made of square steel tube, material: Q235 steel.Driving motor base is installed on the frame.The rotary arm is fixed on the frame connecting with slew bearing.Frame size: (to be confirmed by drawing)2. Driving device for rotary armFrequency control motor with brake Brand of motor: Local famous brand, Power rated: 1.5KW   Rotary arm speed: n=25rpm (frequency motor with brake)3.

Product descriptionThis is a flexible and strong pre-stretched pallet wrapping machine. Its technical solution includes: base plate, ramp, column and machine cavity. The base plate is installed with a base through bolts, and a rotating shaft is installed on the base for rotation. A rotating disk is installed on the upper surface through bolts. The machine cavity is fixed on the bottom plate through bolts. The organic body is installed in the machine cavity. A drive shaft is mounted on the machine body for rotation. The column is fixed on the bottom plate through bolts.

ControlsPLC control wrap process.Cycle pause capability.0-12RPM adjustable by frequency changer.Pneumatic top plate.    Film carriageFilm carriage is fixed for the stretch film roll height, no need moving up-down;Power pre-stretch 250%.Film delivery variable speed by separate AC Drive Motor.Technology Data.Wrap Size: 300-600*300-600*200-800mm Max. Box weight: 50 kg.Power 220V/60Hz/1 Phase 1.0kw1. The control cabinet

Product descriptionLY-2000 ZF online winding and laminating packaging machine uses stretch film/wrap film as packaging material and is used for pallet/line board packaging. The winding machine is used to pack the goods on the pallet, using the retractability and automatic The viscosity binds the goods and the pallet into a whole and plays a fixed role, so the goods will not be scattered or collapsed. It can also prevent dust, moisture and damage to the goods. Online stretch film is used for assembly line operations.

1.Applicablepalletsize:L1000~1200*W1000~1200*H120~150mm2.Applicablepackagesize:350~2000mm(includingpallet)3.Applicableproductweight:Groundbearing.4.Applicablepowersupply:3-phase380V50HZ2KW5.Applicableair:5kgf/cm2,450NL/min6.Singlestrappingspeed:PP20seconds/strap,excludingconveying,hostlifting,positioningtime7.PPstrap:width15~16mm,thickness0.7-0.8mm,skewness<30mm,Thecustomerprovidesthetestmachinestrapbeforeshipment.8.Hotstickingpart:sideface,hotmelttype9.Packingmethod:movementoftheentiremovement(250mmlength)10.Numberofstraps:1~6optional(thestrappositionissetbythecontrolpanel)11.Theloweststra

           modelSpecification600SSwiveling sizeΦ600mmspeed80rpmPackage Size380x380(max)Packing length≥600mmConveying speed8-15m/spower supply380v/50hz/1.1kw*Special specifications can be customized

The applicator can sense the position of the pallet, and then adjust the position of the installation. The working center should be same as the wrapper.Auto sense the paper board quantity and alarm when lack of material, so that the paper boards can be feed manually.The paper board should be in same level without angle.Paper corner magazine 3pcs for each applicator, feed the paper board vertically. The device should be connected with the main wrapper so that whole system work automatically.The buyer should provide the exact specification of the paper board for confirmation.

An electric rotary arm pallet stretch wrapper is a type of packaging equipment used to wrap pallets with stretch film. It consists of a rotary arm that rotates around the stationary pallet, dispensing and stretching the film as it moves. The stretch film helps secure the items on the pallet, providing stability during transportation and storage.The electric rotary arm pallet stretch wrapper is powered by an electric motor, which controls the rotation speed of the arm.

Model No.LY02Paper Core Inner Dia.76mmMachine Weight0.193kg for 2 piecesMachine Height57mmMachine Width115mm

Max. Packing size(mm)             700mm*450mm*900mm（L*W*H）Rotating speed:                        0-50 RPM Power supply                            220V/50Hz/1 Phase: 1.2 kw Weight Capacity                        100kg Packing Materials Stretch film width    &nb

It is suitable for container transportation and bulk packaging of goods, and is widely used in glass products, hardware tools, electrical appliances and electronics, papermaking, ceramics, chemicals, food and beverages, building materials and many other industries.Electric forklift swing arm machines are mainly suitable for modern operations with large production volumes and high packaging efficiency. They can meet different packaging requirements according to the size of the goods. Different packaging systems can be customized according to different products and actual needs on site.①.