Granulating Machine-manufacture,factory,supplier from China

Firstly. What is a bamboo chip machine?A bamboo chip machine is a machine specially used to cut bamboo into slices. It is one of the indispensable equipment in the bamboo processing industry.Second. Bamboo chip machine varietiesAccording to different working methods and uses, bamboo chip machines can be divided into the following varieties:1. Manual bamboo chip machineA manual bamboo chip machine is a simple mechanical equipment, mainly composed of a cutter, a support frame and a manual control device. It is suitable for small-scale bamboo processing, with simple operation and low cost.2.

The turning machine mainly completes the conversion of the engine casing from horizontal to vertical, vertical to horizontal and horizontal rotation operations, and can achieve vertical 90° flipping. The turning machine has a simple structure, low cost, high working efficiency, safety and reliability.Turning machine technical requirements (1) Airframe steel structure requirements • The fuselage adopts Q235 high-quality all-steel welded structure, which has sufficient strength and rigidity.

Product introductionThe working principle of the winding machine is to place the object to be wrapped on the turntable, start the turntable motor to rotate, and naturally drive the turntable to rotate, so that the object placed on the turntable can be wrapped with film around the periphery. At the same time, the elevator motor also starts, driving the entire assembly of the winding machine mold frame to move up and down to achieve winding in the height direction of the object, thus realizing the winding and packaging of the entire appearance of the object.

The carton unpacking machine integrates automatic unboxing, automatic folding of the lower cover, and automatic sealing of the bottom of the carton. The machine is controlled by PLC + human-machine interface. The bottom folding does not stop, and the bottom folding and bottom sealing are completed during transportation; it also completes suction, forming, bottom folding, and bottom sealing at the same time. The entire process is easy to operate, simple to maintain, and has stable performance.

The strapping machine uses strapping tape to bundle products or packages, and then tightens it and joins the two ends through hot-melt bonding with a heating iron. The function of the strapping machine is to reinforce the packaged items so that the items will not be scattered due to weak bundling during transportation and storage. At the same time, they should be bundled neatly and beautifully.

The explosion-proof winding machine is a packaging machine adapted to assembly line operations. It is very suitable for the automated packaging needs of modern enterprises. It plays a very positive role in improving packaging efficiency, reducing labor intensity, and effectively utilizing human resources.

Product introductionThe biomass pellet machine is a kind of biomass energy pretreatment equipment. It mainly uses agricultural and forestry processing waste such as wood chips, straw, rice husks, bark and other biomass as raw materials.

Product introductionMobile Wood Chip Machine is a crusher equipment that can break wood, branches, trunks and other materials into wood chips. The Mobile Wood Chip Machine has the advantages of small size, flexible movement, easy installation, and uniform crushing, and is unanimously welcomed by the market.Mechanical characteristicsCan be moved. Mobility, suitable for areas where raw materials are difficult to move, large forest farms, and large pastures.No electricity required. Places where electricity is inconvenient, such as mountainous woodlands, etc.Large output.

ModelLY-50DForming   and sealing speed8-10ctns/minCarton   sizeL200~600xW150~500xH100~500mmPower   supply110/220V,   50/60Hz, 1 PhasePower200WApplicable   tape48/60/75mm   (Choose one type)Machine   sizeL2500×W2000×H1450mmMachine   weight480kg

Packing machine, also known as strapping machine, strapping machine or strapping machine, uses strapping tape to bundle products or packages, and then tightens them and combines the two ends with hot-melt bonding using a heating iron. The function of the baler is to reinforce the packaged items so that the items will not be scattered due to weak bundling during transportation and storage.

Product descriptionWith the rapid development of technology and the arrival of mechanization, our lives have become more colorful. Automatic folding and sealing machines are witnesses of technological development. In today's market, carton sealing machines have become a common packaging equipment for various companies. The automatic folding cap sealing machine and packaging machine assembly line plays a leading role in today's packaging industry.

The product to be wrappedGoods:                                  Luggage,baggage,suitcase,BoxMeet   Goods size:(L*W*H):  7.87~39.37"(200~1000mm)x   7.87~19.69"(200~500mm)x 3.93~39.37"(100~1000mm)(Supply   design meet customer require.) Max   weight capacity:100kgs   (220lbs)Machine   specification:Machine   picture:GeneralMachine   size: (L*W*H)     47.63"(1210mm)   x 23.62"(600mm) x 39.37"(1000m

产品介绍杂乱堆放的托盘物料振动，以更均匀的排列方式送入链板输送机。链板输送机配合液压上送料辊，将物料强行送入机器进行破碎破碎。材料破碎后，原料中所含的金属通过两个除铁装置排出。物料通过风机泵入旋风分离器。空气与物料分离后，物料从旋风分离器底部落下，空气通过旋风分离器顶部直接进入袋子。除尘器执行除尘的最后一步。机械特性1、木材破碎机最突出的特点是可以用钉子压碎木材。2、一体式木材破碎破碎机适用于脆性物料的破碎，不堵塞，粉尘少，噪音低。3、本机设计缩短了物料在破碎腔中的停留时间，增加了易损件的使用寿命。4、一体式木材破碎机专用锤头制造工艺，增强锤子的硬度，使用寿命是普通锤头的2至3倍。应用范围该设备主要针对建筑模板、木托盘等物料，集破碎和破碎于一体。售后服务承诺：1、供方交货时，应向买方提供设备使用说明书（电气原理图、电路图等）以及安装维修说明书和装箱单。2、设备保修一年，终身维护。3、保修期内，对于非人为因素造成的设备故障，设备出现故障时，卖方将在4小时内做出响应，并提供技术支持，尽快解决问题。在保修期内，我们负责免费提供损坏的零件和配件。保修期过后，仅收取配件费用。取得联系如果您有任何问题，请与我们联系，我会尽快与您联系。

Basic Information：The fully automatic strapping machine control system consists of the core control unit PLC and the human-machine interface for operation. The core control unit is controlled by LG "PLC". The hydraulic system is the core part of the pressurized strapping machine, and the reliability of its work directly determines Whether the baler operates normally and reliably, oil temperature control becomes the key to the hydraulic control part of the metal hydraulic baler.

Product introductionThe centrifugal fan is a machine that relies on input mechanical energy to increase the gas pressure and discharge the gas. It is a driven fluid machine. Centrifugal fans are widely used in ventilation, dust removal and cooling of factories, mines, tunnels, cooling towers, vehicles, ships and buildings; ventilation and draft induction in boilers and industrial furnaces; cooling and cooling in air conditioning equipment and household appliances.

1. This machine is set to save power, save energy and protect the environment.2. The thermal insulation material is aluminum silicate, which has better thermal insulation performance than rock wool. Aluminum silicate has a high density and a good thermal insulation effect.3. Power supply optional: 380V/220V/50HZ4. The heating time is about 20 minutes according to the moisture content of the material. The temperature rises quickly, saving time and allowing the equipment to be put into work as soon as possible.5.

Product introductionEquipped with safety protection electric eye to avoid the risk of collisionThis machine adopts PLC control, photoelectric testing of packaging height, and double safety protection deviceWith slow start and slow stop functions, the power transmission system has longer life and accurate positioningSuitable for bulky and difficult-to-move packages, eliminating the need for a forkliftFor non-standard specifications or special requirements, Liyang Intelligent Packaging can be designed and manufactured according to your requirements.Mechanical characteristicsWith multi-functional

Machine SpecificationMax load size: 1200*1200*2000mmTurntable diameter: 1650 mmTurntable bearing：2000kgTurntable thickness: 10mmTurntable speed: 3-12rpmTable height: 78mmMachine weight: 650 kgSize: 2500*1650*2400mmElectrics: 220V 50Hz 1P

1) Power supply: 380V/50Hz, 1Ph, 1KW;2) PP belt width: 12~13mm3) PP belt thickness: 0.6~1.0mm4) Packing speed: 3.5 seconds/lane5) Bow frame size: width 600mm, height 1250mm6) Table height: 450+50mm7) Bonding method: hot melt bonding;8) Overall machine size: L1800*W750*H2000mm;9) Overall machine weight: 230 kg10) Binding force: 0~80kg11) Working method: one or more parallel channels, including automatic, manual, through and other methods; 

ModeLY-150Electrical3PH,380V,50HZStrap width12-19mmTension adjustment0-70kgsStrapping sizeAccording to customer demandStrapping speed15 pcs/sStrap coil400mm(outside dia.)Machine weight800kgs

The fully automatic online top-covering film winding packaging machine is a packaging machine adapted to assembly line operations. It is very suitable for the automated packaging needs of modern enterprises. It plays a very positive role in improving packaging efficiency, reducing labor intensity, and effectively utilizing human resources. At present, this product has been widely used in packaging lines in chemical, electronic, food, beverage, paper and other industries.The palletized products automatically enter the winding packaging machine station through the conveyor line.

This machine has the advantages of easy entry and exit of packaged objects, wide range of winding and packaging, easy operation and convenient adjustment. Products after winding packaging can reduce the surface wear of the product, improve sealing, and facilitate product storage and transportation. After winding and packaging, not only the product is generous, but also has good moisture-proof, dust-proof, rust-proof, anti-aging, anti-accidental damage, etc. This machine has the advantages of high stability, fast packaging speed, wide packaging range, and easy operation.

Mechanical characteristicsThe machine has a compact structure, small footprint, good chipping quality, low power consumption, and is suitable for mobile operations with a maximum walking speed of 3km/h.Application scopeThe crawler mobile wood chip machine can process pine, miscellaneous wood, poplar, fir, and original bamboo. It is suitable for the material preparation section of small and medium-sized particleboard and fiberboard production enterprises, and can also be used by self-employed individuals to produce commercial wood chips.After-sales service commitment:1.

Machine   shape1550*620*1730mm220kgGoods   range size(L*W*H)     (200-1800)*(200-500)*(0-1000)mm Packing   speed50-60   luggage / hourCost   for one goods 0.1-0.13   USDMax   goods weight100kgControlPLCPower220V/50HZ,   can be changeSpecial   supplied     Foot   pedal,screen,weighing system,remote   control,with coin