High Temperature Burner-manufacture,factory,supplier from China

1. Purpose: High-temperature fans are suitable for working under non-corrosive and high-temperature conditions.2. Form: This fan is made of double-suction type. Viewed from one end of the motor, the impeller can be made to rotate forward or counter-rotate. The air inlet of the fan is at an angle of 105° with the horizontal line, and the air outlet is at an angle of 90° with the horizontal line.

Product introductionGas and air are premixed evenly before entering the combustion head. The combustion head is in the shape of a metal cylinder, and a metal mesh (made of a special alloy) is used to wrap the surface of the metal cylinder. In fully premixed combustion, the flame is only generated on the surface of the burner, and the actual size of the flame is the same as the size of the combustion head. Therefore, the fully premixed burner does not require a large furnace size and can still achieve perfect combustion in a small furnace.

Low carbon and environmental protection: low carbon emissions, renewable fuel, low nitrogen oxide emissions, and no sulfur emissions.Gasification combustion: segmented combustion, low-temperature combustion in the furnace, and secondary high-temperature combustion at the burner.Applicable fuel: The fixed grate is suitable for wood pellets, and the movable grate can be mixed with straw pellets.Widely used: boilers, dryers, hot blast furnaces, kilns, annealing furnaces, incinerators, aluminum rod heating furnaces, etc.High efficiency and energy saving: It saves more than 50% energy compared with

Product introductionThe gas enters the tube under a certain pressure, escapes through the fire hole, obtains oxygen from the surrounding air, and burns, forming a diffusion flame.Mechanical characteristics(1) Simple structure and convenient manufacturing(2) The combustion is stable and will not backfire; it is easy to ignite and adjust(3) Low-pressure gas (200~400Pa or lower) can be used, and no blowing is required and no power consumption is required.(4) The combustion heat intensity is low, the flame is long, and a larger combustion chamber is required.(5) In order to achieve complete combus

The shell is made of Q235 carbon steel, which has strong high temperature resistance and corrosion resistance. It has a built-in metal impeller and sealing disc.It has stable operation and avoids leakage of special gases. It can be customized according to customer requirements and optimized for free.

1. This machine is set to save power, save energy and protect the environment.2. The thermal insulation material is aluminum silicate, which has better thermal insulation performance than rock wool. Aluminum silicate has a high density and a good thermal insulation effect.3. Power supply optional: 380V/220V/50HZ4. The heating time is about 20 minutes according to the moisture content of the material. The temperature rises quickly, saving time and allowing the equipment to be put into work as soon as possible.5.

Product introductionThe crushing equipment specially used for the production of biomass fuel mainly allows the materials to enter the crushing chamber through the high-speed rotation of the rotor. The materials are crushed through the impact force, shear force and mutual impact force between the materials generated by the high-speed rotating rotor. Crushing, products that reach specified specifications after being screened by the screen. This equipment is mainly used to crush wood shavings, wood chips, crop straw, grain and other materials.

Product introductionBiomass fuel is burned in the furnace with reasonable air distribution and gasification components. This secondary air has a very obvious effect. One is to supplement oxygen, and the other is to further strengthen the disturbance of flue gas to make combustion more complete. At present, a large amount of air supplementation is used.

In the future, High Precision high grade pallet wrapping packer will have the following application prospects:Improve production efficiency: The fully automatic winding machine can achieve fully automated production, greatly improving production efficiency.

The emergence of mobile wood chip crusher has brought great convenience to the wood processing industry. Wood crusher integrates cutting and crushing, and is mainly used for crushing various branches, fruit branches, poplar trees, wood boards, strips, scraps and other materials.First of all, it uses a diesel engine as a power source, which has the characteristics of high mobility and flexibility.

Product introductionSeries use of cyclone dust collectors and other dust collectors 1. The dust removal efficiency of cyclone dust collectors generally increases with the increase of dust load, and if the cyclone dust collector is well designed, it can be used to collect any amount of dust that can be transported by air flow materials. Therefore, cyclones are often used as first-stage dust collectors to take advantage of their ability to handle high dust loads. The most common configuration is a cyclone followed by a fabric, electrostatic or wet dust collector.2.

Product descriptionLY-1800GYB, this model is a high-speed rocker arm wrapping packaging machine that can be used alone. It occupies a small space and has a high safety factor.

Product introductionThe working principle of the winding machine is to place the object to be wrapped on the turntable, start the turntable motor to rotate, and naturally drive the turntable to rotate, so that the object placed on the turntable can be wrapped with film around the periphery. At the same time, the elevator motor also starts, driving the entire assembly of the winding machine mold frame to move up and down to achieve winding in the height direction of the object, thus realizing the winding and packaging of the entire appearance of the object.

Basic Information：The fully automatic strapping machine control system consists of the core control unit PLC and the human-machine interface for operation. The core control unit is controlled by LG "PLC". The hydraulic system is the core part of the pressurized strapping machine, and the reliability of its work directly determines Whether the baler operates normally and reliably, oil temperature control becomes the key to the hydraulic control part of the metal hydraulic baler.

The drum dryer has high thermal efficiency and significant energy saving effect. After testing, the thermal efficiency greatly exceeds the level of about 50% of traditional single-cylinder dryers. After the equipment was put into operation, the coal-saving effect was remarkable. The drying mechanism is scientific and reasonable.

Product introductionThe dehydration dryer is a special equipment developed based on the traditional mesh belt dryer. It has strong pertinence, practicality and high energy efficiency. It is widely used for dehydration and drying of various regional and seasonal vegetables and fruits. . Such as: garlic slices, pumpkin, konjac, white radish, yam, bamboo shoots, etc. Since 1993, our factory began to jointly develop and produce the first domestic mesh belt vegetable dryer for pumpkin dehydration and drying with the Chinese Academy of Sciences.

Three-drum dryer is a common industrial drying equipment, widely used in food, chemical, agricultural products and other industries.Three-pass dryer is a high-efficiency combined three-drum dryer. Large three-drum dryers are usually 6 to 7 meters long and are divided into two structural forms: straight and conical. The flow of materials is driven by the blades (i.e. guide plates) in the drum that rotate with the drum to move the materials forward. It is suitable for straight or conical structures.

The turning machine mainly completes the conversion of the engine casing from horizontal to vertical, vertical to horizontal and horizontal rotation operations, and can achieve vertical 90° flipping. The turning machine has a simple structure, low cost, high working efficiency, safety and reliability.Turning machine technical requirements (1) Airframe steel structure requirements • The fuselage adopts Q235 high-quality all-steel welded structure, which has sufficient strength and rigidity.

ModelLY-2000AWrapping   Height Max.2000   mmPacking   Size Max.L   500 - 1200 mm × W 500 - 1200 mmEfficiency45   - 50 loads/hLoad   Capacity2000   kgPack   Speed40   - 60 loads/hRotary   Arm Rotation Speed0   - 12 rpm, variableProtection   SystemAuto   Sense Emergency Brake SystemFilm   Delivery SystemPowered   Roller Pre-Stretch System Up to 250 - 300%Automatic   Film Clamper and CutterStd.Middle   Powered Roller ConveyorL   = 3500 mm, Std.

Product descriptionLY-1800GYB, this model can be used alone for high-speed rocker winding packaging machine, small space, high Factor of safety, random gifts of a certain protective net, etc.The cantilever winding machine is a packaging machine suitable for assembly line operations. It is very suitable for automated packaging in modern enterprises. It can improve packaging efficiency, reduce labor intensity, and effectively utilize human resources. Such products have been used in chemical, electronic, food, beverage, paper and other industries.

Introducing the M-shaped pallet stretch wrapping machine, a state-of-the-art solution for efficient and automated wrapping of pallets. Designed with precision engineering and advanced technology, this machine is specifically built to meet the demands of modern industrial packaging.the M-shaped pallet stretch wrapping machine is designed for durability and longevity. Constructed with high-quality materials and components, it offers reliable performance in high-volume production environments.

It is suitable for container transportation and bulk packaging of goods, and is widely used in glass products, hardware tools, electrical appliances and electronics, papermaking, ceramics, chemicals, food and beverages, building materials and many other industries.Electric forklift swing arm machines are mainly suitable for modern operations with large production volumes and high packaging efficiency. They can meet different packaging requirements according to the size of the goods. Different packaging systems can be customized according to different products and actual needs on site.①.

LY-1800YB/F, this model is a cantilever wrapping packaging machine with an integrated packaging equipment that adds a laminating function. It can complete the two functions of wrapping and top film covering, and can form a five-sided package that is dust-proof, moisture-proof, and rain-proof. Fully unmanned, high efficiency and low cost.

V-slat chain conveyor, conveyor width: 800mm, chain pitch P = 63.5 mm, driving speed: 18m/min.(TBD)Slat width: B = 55 mm, slat length: L = 800 mm, Thickness: S = 10mm, carbon steel Slat bearing: model 2016, NSK brand (Japan brand)Designed with high driving speed to meet the production requirement.The conveyor slat is made in V-Shaped, Angle: 170°.  Loading capacity of slat conveyor: 3000 kg/mChain rollers installed with bearing inside, No oil and No contamination on paper rolls.Heavy duty steel structures, modular design, equipped with vertical shaft driving gear reducer.Tensioner adjusti