Hot Air Stove-manufacture,factory,supplier from China

Product introductionOur company has developed a new type of hot blast stove for burning biomass wood chips, bark, straw, etc. It has been continuously improved in practice and is now a mature product.

The wet material is sent to the hopper by a belt conveyor or bucket elevator, and then enters the feeding end through the feeding pipe of the feeding machine of the hopper. At the same time, the hot air enters the barrel through swirling flow. A fire baffle is installed inside the barrel to prevent hot air from coming into contact with the material to prevent fire. Gravity and centrifugal force are used to disperse materials with different moisture content in different cylinders.

Product introductionBiomass fuel is burned in the furnace with reasonable air distribution and gasification components. This secondary air has a very obvious effect. One is to supplement oxygen, and the other is to further strengthen the disturbance of flue gas to make combustion more complete. At present, a large amount of air supplementation is used.

Shakron dust collector is a type of dust removal device. The dust removal mechanism is to make the dust-containing air flow rotate, use centrifugal force to separate the dust particles from the air flow and capture them on the wall, and then use gravity to make the dust particles fall into the ash hopper. It consists of an intake pipe, an exhaust pipe, a cylinder, a cone and an ash hopper. The Shakron dust collector has a simple structure, is easy to manufacture, install and maintain, and has low equipment investment and operating costs.

1. Purpose: High-temperature fans are suitable for working under non-corrosive and high-temperature conditions.2. Form: This fan is made of double-suction type. Viewed from one end of the motor, the impeller can be made to rotate forward or counter-rotate. The air inlet of the fan is at an angle of 105° with the horizontal line, and the air outlet is at an angle of 90° with the horizontal line.

Product introductionSeries use of cyclone dust collectors and other dust collectors 1. The dust removal efficiency of cyclone dust collectors generally increases with the increase of dust load, and if the cyclone dust collector is well designed, it can be used to collect any amount of dust that can be transported by air flow materials. Therefore, cyclones are often used as first-stage dust collectors to take advantage of their ability to handle high dust loads. The most common configuration is a cyclone followed by a fabric, electrostatic or wet dust collector.2.

Product introductionThe star-shaped unloader is used to be installed at the discharge port of the unloader that works under negative pressure. The upper part receives the material discharged by the unloader. It relies on the rotating impeller to transport the material and is also responsible for sealing to prevent During the pneumatic conveying process, air is sucked in from the discharge port to ensure the normal discharge of the unloader. As a special unloading equipment, it plays a great role in cleaning and cleaning work.

Product introductionThe so-called vacuum drying is to heat and dry the dry materials under vacuum conditions. If a vacuum pump is used to extract air and moisture, the drying speed will be accelerated.Mechanical characteristicsThe boiling point of the material solution decreases under vacuum. Increase the heat transfer driving force of the evaporator.

Product introductionThe gas enters the tube under a certain pressure, escapes through the fire hole, obtains oxygen from the surrounding air, and burns, forming a diffusion flame.Mechanical characteristics(1) Simple structure and convenient manufacturing(2) The combustion is stable and will not backfire; it is easy to ignite and adjust(3) Low-pressure gas (200~400Pa or lower) can be used, and no blowing is required and no power consumption is required.(4) The combustion heat intensity is low, the flame is long, and a larger combustion chamber is required.(5) In order to achieve complete combus

Low carbon and environmental protection: low carbon emissions, renewable fuel, low nitrogen oxide emissions, and no sulfur emissions.Gasification combustion: segmented combustion, low-temperature combustion in the furnace, and secondary high-temperature combustion at the burner.Applicable fuel: The fixed grate is suitable for wood pellets, and the movable grate can be mixed with straw pellets.Widely used: boilers, dryers, hot blast furnaces, kilns, annealing furnaces, incinerators, aluminum rod heating furnaces, etc.High efficiency and energy saving: It saves more than 50% energy compared with

Product introductionThe centrifugal fan is a machine that relies on input mechanical energy to increase the gas pressure and discharge the gas. It is a driven fluid machine. Centrifugal fans are widely used in ventilation, dust removal and cooling of factories, mines, tunnels, cooling towers, vehicles, ships and buildings; ventilation and draft induction in boilers and industrial furnaces; cooling and cooling in air conditioning equipment and household appliances.

The stopping sorting deck is composed of 9\12 stop units, working width: 3600mm, 4800mm, stop unit width: B=400mm, stop unit lifting is realized by pneumatic tires.The stop plate adopts an anti-pinch structure.The stop plate panel is electroplated.The front of each unit must be marked with Arabic numerals in orderFabricated steel structureInstalled in a concrete slopeEquipped with an air control box, the air table is lifted, and the pneumatic control valve is installed in the air control box, which is convenient for maintenance.

Product introductionPP spray tower is also called PP washing tower, acid mist purification tower - acid-base waste gas treatment equipment; working principle of spray tower: waste gas is introduced into the purification tower from the air duct, and passes through the packing layer. The waste gas and the absorption liquid are fully gas-liquid two-phase. After contact absorption and neutralization reaction, the exhaust gas is purified, dehydrated and defogged by the demister plate, and then discharged into the atmosphere by the fan.

Product introductionGas and air are premixed evenly before entering the combustion head. The combustion head is in the shape of a metal cylinder, and a metal mesh (made of a special alloy) is used to wrap the surface of the metal cylinder. In fully premixed combustion, the flame is only generated on the surface of the burner, and the actual size of the flame is the same as the size of the combustion head. Therefore, the fully premixed burner does not require a large furnace size and can still achieve perfect combustion in a small furnace.

1) Power supply: 380V/50Hz, 1Ph, 1KW;2) PP belt width: 12~13mm3) PP belt thickness: 0.6~1.0mm4) Packing speed: 3.5 seconds/lane5) Bow frame size: width 600mm, height 1250mm6) Table height: 450+50mm7) Bonding method: hot melt bonding;8) Overall machine size: L1800*W750*H2000mm;9) Overall machine weight: 230 kg10) Binding force: 0~80kg11) Working method: one or more parallel channels, including automatic, manual, through and other methods; 

The strapping machine uses strapping tape to bundle products or packages, and then tightens it and joins the two ends through hot-melt bonding with a heating iron. The function of the strapping machine is to reinforce the packaged items so that the items will not be scattered due to weak bundling during transportation and storage. At the same time, they should be bundled neatly and beautifully.

Product descriptionModelNoteMax.packing SizeL1200 mm x W1200 mmCustomizedMax. wrapping Height2000 mmCustomizedEfficiency45-50 loads/hour/Load Capacity2000 kgCustomizedRotary Arm Rotation Speed0-12 rpm,variable/Protection systemAuto Sense Emergency Brake System/Automatic Film Holder and CutterStd.In-feed and outlet powerful roller conveyorOptional  length.Conveyor speed0-12 m/min, variable/Air supply6-8   kg/cm²/Power SupplyAC220V   1ph 50/60HZ 3.5KW/Machine sizeL 4000 mm x W 4000 mm x H 3200 mm/Machine weight1000 kg/

Packing machine, also known as strapping machine, strapping machine or strapping machine, uses strapping tape to bundle products or packages, and then tightens them and combines the two ends with hot-melt bonding using a heating iron. The function of the baler is to reinforce the packaged items so that the items will not be scattered due to weak bundling during transportation and storage.

General description:The machine includes the:Radial wrapper partsGear and rack driving devicePrecise straight railway Steel frameWhole set of pneumatic control system, user connect to the stop valve inlet.The necessary control box, all the proximity switch and photo-eye frame.Auto hot melt glue spray device, auto film press device, auto film cut device, auto film sticking device.

SpecificationRotating ring internal diameter: 450-2000mm (to be customized)Wrapping dimension: Width & Height: to be designed; Length: 1800-5000mm; Weight: 300-1000kgsRotating ring speed: Max33rpmCompressed air pressure: 0.5MpaAir consumption: 10L/MFilm carriagePre-stretch / Mechanical stretch movie carriageWidth: 500mm;Core size: 3’’;Film roll diameter: max 240mmThickness: 17-35μmControl SystemPLC electric powered manage system, contact display screen panelRing rotating pace managed by means of the inverterIn-feed &

1. This machine is set to save power, save energy and protect the environment.2. The thermal insulation material is aluminum silicate, which has better thermal insulation performance than rock wool. Aluminum silicate has a high density and a good thermal insulation effect.3. Power supply optional: 380V/220V/50HZ4. The heating time is about 20 minutes according to the moisture content of the material. The temperature rises quickly, saving time and allowing the equipment to be put into work as soon as possible.5.

Product Details：The three-cylinder dryer production line consists of: heat source system, feeding system, conveyor belt, feeding chute, drying equipment, discharge belt, vibrating classification screen, dust removal system, induced draft fan, electronic control system and other equipment. The sand is sent to the hopper by a belt conveyor or bucket elevator, and then enters the feeding end through the feeding pipe through the feeding machine of the hopper.

The self-propelled winding machine uses LLDPE stretch film as the main material to wrap large and heavy machines or art products to prevent the goods from being scattered and collapsed, and can protect the goods from dust, moisture and damage. , widely used in printing, papermaking, chemical, food, logistics and other industries. The film-coated products are compact, strong and beautiful in appearance.1. Automatic walking pre-stretching and winding operation, can work continuously for 8 hours2.

Luggage wrapper is designed to wrap luggage and related items for security purpose in airport. Film provides extra support while the luggage is being transport to protect from being damaged. The operator places the luggage on the platform and adjusts vertical rods to secure bag according the luggage's size.