Paper Corner Feeding-manufacture,factory,supplier from China

Integrated pallet edge corner protector applicator with side welding vertical type strapping systemPacking system composition1. Movable pallet top angle corner applicator;2. Side welding Vertical type strapping machine;3.

The applicator can sense the position of the pallet, and then adjust the position of the installation. The working center should be same as the wrapper.Auto sense the paper board quantity and alarm when lack of material, so that the paper boards can be feed manually.The paper board should be in same level without angle.Paper corner magazine 3pcs for each applicator, feed the paper board vertically. The device should be connected with the main wrapper so that whole system work automatically.The buyer should provide the exact specification of the paper board for confirmation.

The wet material is sent to the hopper by a belt conveyor or bucket elevator, and then enters the feeding end through the feeding pipe of the feeding machine of the hopper. At the same time, the hot air enters the barrel through swirling flow. A fire baffle is installed inside the barrel to prevent hot air from coming into contact with the material to prevent fire. Gravity and centrifugal force are used to disperse materials with different moisture content in different cylinders.

Product Details：The three-cylinder dryer production line consists of: heat source system, feeding system, conveyor belt, feeding chute, drying equipment, discharge belt, vibrating classification screen, dust removal system, induced draft fan, electronic control system and other equipment. The sand is sent to the hopper by a belt conveyor or bucket elevator, and then enters the feeding end through the feeding pipe through the feeding machine of the hopper.

1.Applicablepalletsize:L1000~1200*W1000~1200*H120~150mm2.Applicablepackagesize:350~2000mm(includingpallet)3.Applicableproductweight:Groundbearing.4.Applicablepowersupply:3-phase380V50HZ2KW5.Applicableair:5kgf/cm2,450NL/min6.Singlestrappingspeed:PP20seconds/strap,excludingconveying,hostlifting,positioningtime7.PPstrap:width15~16mm,thickness0.7-0.8mm,skewness<30mm,Thecustomerprovidesthetestmachinestrapbeforeshipment.8.Hotstickingpart:sideface,hotmelttype9.Packingmethod:movementoftheentiremovement(250mmlength)10.Numberofstraps:1~6optional(thestrappositionissetbythecontrolpanel)11.Theloweststra

Machine Description:The fixed paper stopper is composed of a plate type.Spray paint on the surface of the fixed plate.Fabricated steel structure.Install in the pit.Working width: 3600mm\4800mm.

Machine Description：The maximum lifting weight is 4 tons.The lifting height is 5.5m.Up and down frequency 40 times/hourThe upender elevator utilizes the weight of the paper roll andthe counterweight to stand up while lowering it, which is   convenient for the transportation of the clamp type forklift and the stacking   of the paper roll.The elevator adopts chain lifting,   frequency conversion speed regulation, variable speed start and variable stop   design, which can ensure the smooth operation of the machine.The vertical shaft-mounted reducer of   SEW is used for th

1. IntroductionThe paper kicker (also known as the paper pusher) is suitable for the paper roll automatic conveyor line in the completion section of the papermaking workshop. It can kick the paper roll from the V-shaped chain conveyor; it can also catch the rolled paper roll to make the paper roll Slowly stop and use as a buffer to complete the transposition of the paper roll on the production line. It can also be used for transposition of non-automatic online and similar items in other industries. 2.

V-slat chain conveyor, conveyor width: 800mm, chain pitch P = 63.5 mm, driving speed: 18m/min.(TBD)Slat width: B = 55 mm, slat length: L = 800 mm, Thickness: S = 10mm, carbon steel Slat bearing: model 2016, NSK brand (Japan brand)Designed with high driving speed to meet the production requirement.The conveyor slat is made in V-Shaped, Angle: 170°.  Loading capacity of slat conveyor: 3000 kg/mChain rollers installed with bearing inside, No oil and No contamination on paper rolls.Heavy duty steel structures, modular design, equipped with vertical shaft driving gear reducer.Tensioner adjusti

Introducing the small paper roll packaging machine, a modern day and environment friendly packaging solution. Designed with precision engineering and superior technology, the desktop is specially designed to meet the wants of contemporary industrial packaging.Small paper roll packaging machines are designed for multiple industries. It is constructed with extremely good substances and factors to grant dependable overall performance in high-volume manufacturing environments.

ModelLY- P500Wrapping   sizediameter(200-800mm);   width(200-500mm)Packing   efficiency20-40   rolls/hourTurntable   speed0-12   variable speed by frequency changerTurntable   height700mmTurntable   capacity200kgMachine   shape size1460mm×840mm×1492mmPower   supply0.8kw/AC380VFilm   carriagePre-stretch   film carriage, up to 250%,automatic feeding filmControl   systemPLC,   wrapping layer, wrapping times is adjustable

Paper Core Inner Dia.51mm51mm76mmPaper Core Inner Dia.460mm520mm520mmFilm Width420-450mm500mmMachine Weight0.42KG0.45KGMachine Height580mm620mmMachine Width220mmStreching Rate10-20%

This system is used in the transportation of jumbo tissue roll.Includes main machine frame, wheels, driving unit motor (brake, VFD) geared box, as well as the accessories.Railway with wireless power systemTotal length: 200mm*2 parallel in one direction and 15m*2 in cross directionWireless power supply system to be installed underground.Chain rollers installed with bearing inside, No oil and No contamination on paper rolls.Heavy duty steel structures, modular design, equipped with vertical shaft driving gear reducer.Tensioner adjusting device & lubrication can be operated on floor level, ea

Packing size：(800-1400)mm x(800-1200)mmPackaging efficiency：30 totes an hourRotary speed：0-12 rpm, adjustableDimensions of turntable：Medium 2000mm high: 500mmLoad bearing of turntable：2000kg, rotary support 2000kgMembrane frame：Pre-stretch ratio 350% , adjustableThe top：OptionalControl system：PLC controlPneumatic system：0.6-0.8Mpa 250NL/minMachine weight：1000kgMachine size：3800mmx3200mmx3300mmOperating voltage：380V 50Hz 3PTop film feeding system：Electric transmissionTop membrane rupture system： Mechanical film breakingTop film lifting device：Electric lifting linear guide model, chain driv

The stopping sorting deck is composed of 9\12 stop units, working width: 3600mm, 4800mm, stop unit width: B=400mm, stop unit lifting is realized by pneumatic tires.The stop plate adopts an anti-pinch structure.The stop plate panel is electroplated.The front of each unit must be marked with Arabic numerals in orderFabricated steel structureInstalled in a concrete slopeEquipped with an air control box, the air table is lifted, and the pneumatic control valve is installed in the air control box, which is convenient for maintenance.

The cylinder paper wrapping machine packaging machine adopts PLC automatic control and has reliable performance.

Material: PE Metallocene: Available(10%-25%) Type：Usage: Stretch FilmPackaging Film Application: Feature: Prevent any potential damageMoisture proof Hardness: Soft Processing: Multiple Extrusion Color:Enviromental protection: Clear, Green, Yellow, Red, Blue, etc non-toxic Thickness: 15mic〜38mic, Customized Width: 100mm-1500mm, Customized Weight(G.W.): 2〜30kg,Customized Length: Customi zed: Customized Elongation at break: 400%-500% Tear strength: High Paper Core: 3 inch Paper Core Weight: 0.3kg〜1.1kg Packing: 1/4/6 rolls

Ly-1650 pre-stretch winding machine, suitable for cargo container transport and bulk packaging, widely used in glass products, hardware tools, electrical appliances, electronics, paper, ceramics, chemicals, food and beverage, building materials and many other industries.

SpecificationRotating ring internal diameter: 450-2000mm (to be customized)Wrapping dimension: Width & Height: to be designed; Length: 1800-5000mm; Weight: 300-1000kgsRotating ring speed: Max33rpmCompressed air pressure: 0.5MpaAir consumption: 10L/MFilm carriagePre-stretch / Mechanical stretch movie carriageWidth: 500mm;Core size: 3’’;Film roll diameter: max 240mmThickness: 17-35μmControl SystemPLC electric powered manage system, contact display screen panelRing rotating pace managed by means of the inverterIn-feed &

Electrical1PH,110V/220V,50HZ60HZPower consumption950WWarm-up time180sStrap width8-19mm(fix)PP strap paper coil l.D8"(200mm)Tension adjustment0-70kgsStrapping speed2.4s/pcs (25pcs/min)ArchAluminum archArch sizeW:850×H:600mmMin. strapping sizeW:100×H:30mmMax. strapping sizeW:850×H:585mmWorking table height814mmMachine dimension(LxW×H)1420×633×1520mmWooden size (L×W*H)Arch assembled 1476×689×1644mmArch disassembled 1476×829×999mmMachine weight280kgs

1 Specification and features Wrapper machineTurntable diameter:          3300mm.Turntable speed:            0-15rmp.Turntable height:            Installed under ground level.  Wrapping size:              Roll diameter (1000-1500) mm Roll width (330-2850) mmLoading capacity:           3500kgs.Packing efficiency:&nb

Product descriptionLY-2000P/Y, a large-scale winding cylinder, mainly packs cylindrical goods in the axial direction to realize the overall wrapping of goods, which is beneficial to the storage, transportation, dustproof and moisture-proof of goods, effectively reduce packaging costs and improving efficiency, and supports optional cylinder/tray dual-purpose type, automatic ejection type, automatic in-line type, etc.The cylinder paper wrapping machine packaging machine adopts PLC automatic control and has reliable performance.

Turntable diameter: 3000mm.Equipped with big diameter slew bearing for heavy duty bearing, stable run ability and long durability. Rotary turntable motor: SEW brand. V type slat conveyor installed on Turntable, single row V-slat conveyor;Driving   speed:18   m/min (Speed adjustable, Siemens inverter)Chain   pitch:P =   63.5 mmSlat   width:B =   55 mmSlat   length:L =   250 mmThickness:S =   10 mm carbon steelSlat   bearing:China   brandGear   motor:SEW   brand

◆Adopting PLC automatic control, the performance is reliable, and the winding method and number of times can be changed as needed.◆The turntable automatically resets to ensure accurate positioning of goods in and out.◆Users can choose resistive or pre-stretched film devices.◆The convenient unwinding seat can accommodate international standard film with an outer diameter of 250mm, a paper core of 76mm, and a height of 500mm.◆According to customer needs, it can be equipped with a photoelectric control head for automatic height measurement.◆We can design and manufacture supporting production line