Rotary Cutting And Crushing All In One Machine-manufacture,factory,supplier from China

产品介绍秸秆捆回转切割机由框架装置、旋切装置、送料装置和过载保护装置组成。该机结构简单，机身采用钢板，经久耐用，移动方便。送料装置采用外齿轮链旋转，无死角，效率高。旋转切割转子具有锋利的刀片，可以处理各种不同厚度、长度和含水量的捆包和捆包。树枝断裂率高，可以抛出10米远，避免了受伤等事故，保证了操作人员的人身安全。机械特性1、大直径送料：送料直径有2000mm、2500mm、3000mm三种规格可供选择。大直径便于给料堆或成捆的物料，如堆秸秆、牧草、或捆秸秆和牧草。间歇进料、连续破碎、喷射出料的进料口高度约为1米。由于其直径大、高度高，一次进料可进料量大，进料口的旋转带动物料移动到破碎机的转子上，使物料连续破碎，实现间歇进料，降低工人进料强度。破碎后的物料随转子旋转，在离心力的作用下高速从卸料口飞出，节省了输送设备。2、一体化切碎破碎设备的核心部件是安装在破碎转子上的圆盘形刀具和锤子。在操作过程中，大体积的材料被圆盘形切割机切割成小体积，然后用锤子破碎。这种切碎和破碎的工作方法提高了破碎效率。3、核心部件采用耐磨坚韧合金制成。设备的核心部件主要是岩石切割机和锤子。这些零件由具有良好韧性和较强抗冲击性的合金制成。圆盘形刀具具有高硬度和耐磨性，锤子的两个工作边缘焊接了超耐磨硬质合金材料，大大提高了其使用寿命。

The emergence of mobile wood chip crusher has brought great convenience to the wood processing industry. Wood crusher integrates cutting and crushing, and is mainly used for crushing various branches, fruit branches, poplar trees, wood boards, strips, scraps and other materials.First of all, it uses a diesel engine as a power source, which has the characteristics of high mobility and flexibility.

产品介绍杂乱堆放的托盘物料振动，以更均匀的排列方式送入链板输送机。链板输送机配合液压上送料辊，将物料强行送入机器进行破碎破碎。材料破碎后，原料中所含的金属通过两个除铁装置排出。物料通过风机泵入旋风分离器。空气与物料分离后，物料从旋风分离器底部落下，空气通过旋风分离器顶部直接进入袋子。除尘器执行除尘的最后一步。机械特性1、木材破碎机最突出的特点是可以用钉子压碎木材。2、一体式木材破碎破碎机适用于脆性物料的破碎，不堵塞，粉尘少，噪音低。3、本机设计缩短了物料在破碎腔中的停留时间，增加了易损件的使用寿命。4、一体式木材破碎机专用锤头制造工艺，增强锤子的硬度，使用寿命是普通锤头的2至3倍。应用范围该设备主要针对建筑模板、木托盘等物料，集破碎和破碎于一体。售后服务承诺：1、供方交货时，应向买方提供设备使用说明书（电气原理图、电路图等）以及安装维修说明书和装箱单。2、设备保修一年，终身维护。3、保修期内，对于非人为因素造成的设备故障，设备出现故障时，卖方将在4小时内做出响应，并提供技术支持，尽快解决问题。在保修期内，我们负责免费提供损坏的零件和配件。保修期过后，仅收取配件费用。取得联系如果您有任何问题，请与我们联系，我会尽快与您联系。

Product introductionThe crushing equipment specially used for the production of biomass fuel mainly allows the materials to enter the crushing chamber through the high-speed rotation of the rotor. The materials are crushed through the impact force, shear force and mutual impact force between the materials generated by the high-speed rotating rotor. Crushing, products that reach specified specifications after being screened by the screen. This equipment is mainly used to crush wood shavings, wood chips, crop straw, grain and other materials.

Product introductionBiomass fuel is burned in the furnace with reasonable air distribution and gasification components. This secondary air has a very obvious effect. One is to supplement oxygen, and the other is to further strengthen the disturbance of flue gas to make combustion more complete. At present, a large amount of air supplementation is used.

1. Machine main frameGantry type frame, made of square steel tube, material: Q235 steel.Driving motor base is installed on the frame.The rotary arm is fixed on the frame connecting with slew bearing.Frame size: (to be confirmed by drawing)2. Driving device for rotary armFrequency control motor with brake Brand of motor: Local famous brand, Power rated: 1.5KW   Rotary arm speed: n=25rpm (frequency motor with brake)3.

1. Purpose: High-temperature fans are suitable for working under non-corrosive and high-temperature conditions.2. Form: This fan is made of double-suction type. Viewed from one end of the motor, the impeller can be made to rotate forward or counter-rotate. The air inlet of the fan is at an angle of 105° with the horizontal line, and the air outlet is at an angle of 90° with the horizontal line.

Product introductionDuring the drying process, heat is transferred from the inner wall of the drum to its outer wall, passing through the dried food materials attached to the outer wall of the drum, evaporating the moisture on the materials. It is a continuous drying production machine.The dryer is mainly used in mineral processing, building materials, metallurgy, chemical industry and other departments to dry materials with a certain humidity or particle size. The dryer has strong adaptability to materials and can dry a variety of materials.

1. Fully automatic, specially designed for long materials such as pipes and wood; low energy consumption; easy operation and control with touch screen and PLC; automatic film cutting and grabbing device.2. Stable performance, 10-year working life, and 2-year quality guarantee.3. Designed and manufactured to European standards, with the same quality, but at Chinese market prices; passed CE certificate.4. Accept design orders from customers and meet their different requirements.5. Suitable for packaging long and thin items.

Product introductionMobile Wood Chip Machine is a crusher equipment that can break wood, branches, trunks and other materials into wood chips. The Mobile Wood Chip Machine has the advantages of small size, flexible movement, easy installation, and uniform crushing, and is unanimously welcomed by the market.Mechanical characteristicsCan be moved. Mobility, suitable for areas where raw materials are difficult to move, large forest farms, and large pastures.No electricity required. Places where electricity is inconvenient, such as mountainous woodlands, etc.Large output.

Firstly. What is a bamboo chip machine?A bamboo chip machine is a machine specially used to cut bamboo into slices. It is one of the indispensable equipment in the bamboo processing industry.Second. Bamboo chip machine varietiesAccording to different working methods and uses, bamboo chip machines can be divided into the following varieties:1. Manual bamboo chip machineA manual bamboo chip machine is a simple mechanical equipment, mainly composed of a cutter, a support frame and a manual control device. It is suitable for small-scale bamboo processing, with simple operation and low cost.2.

The turning machine mainly completes the conversion of the engine casing from horizontal to vertical, vertical to horizontal and horizontal rotation operations, and can achieve vertical 90° flipping. The turning machine has a simple structure, low cost, high working efficiency, safety and reliability.Turning machine technical requirements (1) Airframe steel structure requirements • The fuselage adopts Q235 high-quality all-steel welded structure, which has sufficient strength and rigidity.

ModelLY-50DForming   and sealing speed8-10ctns/minCarton   sizeL200~600xW150~500xH100~500mmPower   supply110/220V,   50/60Hz, 1 PhasePower200WApplicable   tape48/60/75mm   (Choose one type)Machine   sizeL2500×W2000×H1450mmMachine   weight480kg

Rotary ring wrapping machine:Technology data:Load   size(mm)L1200×W1000×H1200-1600   mmConveyor   height 580 mm Conveyor effective   width1200mmPacking   efficiency50-65 loads   / hourRotary ring   speed0-45rpmPower supply380V 50Hz   3P   5 kwMax load   capacity2000kgsWorking   ambianceIndoor,   normal temperatureSupply scopeMachine main frame                              Gantry type frame, made of square steel tube, material: Q235 steel.Driving

Product DescriptionThe desktop is designed in particular for the market and the manipulate panel is effortless to recognize for operators from one of a kind countries. And its value is a great deal decrease than machines of the equal quality. Its set up is very simple, customers solely want to erect the mast and tighten it to use.1. Control system:2.Film carriageThe movie head is at the facet of the mast, the mast can be put down on the base in packaging.

Machine   shape1550*620*1730mm220kgGoods   range size(L*W*H)     (200-1800)*(200-500)*(0-1000)mm Packing   speed50-60   luggage / hourCost   for one goods 0.1-0.13   USDMax   goods weight100kgControlPLCPower220V/50HZ,   can be changeSpecial   supplied     Foot   pedal,screen,weighing system,remote   control,with coin

The low price of the upper and lower word carton sealing machine is mainly suitable for carton sealing and packaging. It can be used as a stand-alone machine or in conjunction with the assembly line. It can be used as a single carton or in combination with carton forming and unpacking machines, cartoning machines, and labeling machines. Machines, strapping machines, pallet stackers (palletizing robots), conveyors and other equipment are used in a packaging assembly line and are necessary equipment for packaging assembly line operations.

This system is used in the transportation of jumbo tissue roll.Includes main machine frame, wheels, driving unit motor (brake, VFD) geared box, as well as the accessories.Railway with wireless power systemTotal length: 200mm*2 parallel in one direction and 15m*2 in cross directionWireless power supply system to be installed underground.Chain rollers installed with bearing inside, No oil and No contamination on paper rolls.Heavy duty steel structures, modular design, equipped with vertical shaft driving gear reducer.Tensioner adjusting device & lubrication can be operated on floor level, ea

◆Adopting PLC automatic control, the performance is reliable, and the winding method and number of times can be changed as needed.◆The turntable automatically resets to ensure accurate positioning of goods in and out.◆Users can choose resistive or pre-stretched film devices.◆The convenient unwinding seat can accommodate international standard film with an outer diameter of 250mm, a paper core of 76mm, and a height of 500mm.◆According to customer needs, it can be equipped with a photoelectric control head for automatic height measurement.◆We can design and manufacture supporting production line

An electric rotary arm pallet stretch wrapper is a type of packaging equipment used to wrap pallets with stretch film. It consists of a rotary arm that rotates around the stationary pallet, dispensing and stretching the film as it moves. The stretch film helps secure the items on the pallet, providing stability during transportation and storage.The electric rotary arm pallet stretch wrapper is powered by an electric motor, which controls the rotation speed of the arm.

Product descriptionLY-1800GYB, this model can be used alone for high-speed rocker winding packaging machine, small space, high Factor of safety, random gifts of a certain protective net, etc.The cantilever winding machine is a packaging machine suitable for assembly line operations. It is very suitable for automated packaging in modern enterprises. It can improve packaging efficiency, reduce labor intensity, and effectively utilize human resources. Such products have been used in chemical, electronic, food, beverage, paper and other industries.

1) Power supply: 380V/50Hz, 1Ph, 1KW;2) PP belt width: 12~13mm3) PP belt thickness: 0.6~1.0mm4) Packing speed: 3.5 seconds/lane5) Bow frame size: width 600mm, height 1250mm6) Table height: 450+50mm7) Bonding method: hot melt bonding;8) Overall machine size: L1800*W750*H2000mm;9) Overall machine weight: 230 kg10) Binding force: 0~80kg11) Working method: one or more parallel channels, including automatic, manual, through and other methods; 

Luggage wrapper is designed to wrap luggage and related items for security purpose in airport. Film provides extra support while the luggage is being transport to protect from being damaged. The operator places the luggage on the platform and adjusts vertical rods to secure bag according the luggage's size.

General description:The machine includes the:Radial wrapper partsGear and rack driving devicePrecise straight railway Steel frameWhole set of pneumatic control system, user connect to the stop valve inlet.The necessary control box, all the proximity switch and photo-eye frame.Auto hot melt glue spray device, auto film press device, auto film cut device, auto film sticking device.