Vegetable Drying Machine-manufacture,factory,supplier from China

Product introductionThe dehydration dryer is a special equipment developed based on the traditional mesh belt dryer. It has strong pertinence, practicality and high energy efficiency. It is widely used for dehydration and drying of various regional and seasonal vegetables and fruits. . Such as: garlic slices, pumpkin, konjac, white radish, yam, bamboo shoots, etc. Since 1993, our factory began to jointly develop and produce the first domestic mesh belt vegetable dryer for pumpkin dehydration and drying with the Chinese Academy of Sciences.

Product introduction：Small and medium-sized dryers have strong adaptability to materials and can dry a variety of materials. The machines and equipment are easy to use and reliable, so they are widely used.Mechanical characteristicsThe small and medium-sized dryer is a new type of micro multi-purpose dryer that is suitable for various drying tasks, such as various agricultural and animal husbandry crops, sand, gravel, fly ash, etc.

1. This machine is set to save power, save energy and protect the environment.2. The thermal insulation material is aluminum silicate, which has better thermal insulation performance than rock wool. Aluminum silicate has a high density and a good thermal insulation effect.3. Power supply optional: 380V/220V/50HZ4. The heating time is about 20 minutes according to the moisture content of the material. The temperature rises quickly, saving time and allowing the equipment to be put into work as soon as possible.5.

Product introductionThe so-called vacuum drying is to heat and dry the dry materials under vacuum conditions. If a vacuum pump is used to extract air and moisture, the drying speed will be accelerated.Mechanical characteristicsThe boiling point of the material solution decreases under vacuum. Increase the heat transfer driving force of the evaporator.

Product Details：The three-cylinder dryer production line consists of: heat source system, feeding system, conveyor belt, feeding chute, drying equipment, discharge belt, vibrating classification screen, dust removal system, induced draft fan, electronic control system and other equipment. The sand is sent to the hopper by a belt conveyor or bucket elevator, and then enters the feeding end through the feeding pipe through the feeding machine of the hopper.

Product introductionFour-process drum dryer. During the drying process, heat is transferred from the inner wall of the drum to its outer wall, passing through the dried food materials attached to the outer wall of the drum, evaporating the moisture on the materials. It is a continuous drying process. Production machinery. The four-process drum dryer is mainly used in mineral processing, building materials, metallurgy, chemical industry and other departments to dry materials with a certain humidity or particle size.

Product introductionCow dung dryers (chicken dung dryers, duck dung dryers, horse dung dryers) are suitable for large, medium and small farms and areas with relatively developed breeding industries. According to the requirements of the drying products, different methods can be used. heat source.

Product introductionDuring the drying process, heat is transferred from the inner wall of the drum to its outer wall, passing through the dried food materials attached to the outer wall of the drum, evaporating the moisture on the materials. It is a continuous drying production machine.The dryer is mainly used in mineral processing, building materials, metallurgy, chemical industry and other departments to dry materials with a certain humidity or particle size. The dryer has strong adaptability to materials and can dry a variety of materials.

Dryers are mainly used for drying materials with different humidity or particle size in the fields of mineral processing, building materials, metallurgy, chemical industry, food, etc. Dryers have strong adaptability to materials and can dry various materials. Moreover, the equipment is easy to operate, so they are widely used. They can be divided into industrial and civil use. Industrial dryers are also called drying equipment or dryers. The machine is mainly composed of a rotating body, a lifting plate, a rotating device support, and a sealing ring.

The drum dryer has high thermal efficiency and significant energy saving effect. After testing, the thermal efficiency greatly exceeds the level of about 50% of traditional single-cylinder dryers. After the equipment was put into operation, the coal-saving effect was remarkable. The drying mechanism is scientific and reasonable.

Three-drum dryer is a common industrial drying equipment, widely used in food, chemical, agricultural products and other industries.Three-pass dryer is a high-efficiency combined three-drum dryer. Large three-drum dryers are usually 6 to 7 meters long and are divided into two structural forms: straight and conical. The flow of materials is driven by the blades (i.e. guide plates) in the drum that rotate with the drum to move the materials forward. It is suitable for straight or conical structures.

Firstly. What is a bamboo chip machine?A bamboo chip machine is a machine specially used to cut bamboo into slices. It is one of the indispensable equipment in the bamboo processing industry.Second. Bamboo chip machine varietiesAccording to different working methods and uses, bamboo chip machines can be divided into the following varieties:1. Manual bamboo chip machineA manual bamboo chip machine is a simple mechanical equipment, mainly composed of a cutter, a support frame and a manual control device. It is suitable for small-scale bamboo processing, with simple operation and low cost.2.

The turning machine mainly completes the conversion of the engine casing from horizontal to vertical, vertical to horizontal and horizontal rotation operations, and can achieve vertical 90° flipping. The turning machine has a simple structure, low cost, high working efficiency, safety and reliability.Turning machine technical requirements (1) Airframe steel structure requirements • The fuselage adopts Q235 high-quality all-steel welded structure, which has sufficient strength and rigidity.

Product introductionMobile Wood Chip Machine is a crusher equipment that can break wood, branches, trunks and other materials into wood chips. The Mobile Wood Chip Machine has the advantages of small size, flexible movement, easy installation, and uniform crushing, and is unanimously welcomed by the market.Mechanical characteristicsCan be moved. Mobility, suitable for areas where raw materials are difficult to move, large forest farms, and large pastures.No electricity required. Places where electricity is inconvenient, such as mountainous woodlands, etc.Large output.

The strapping machine uses strapping tape to bundle products or packages, and then tightens it and joins the two ends through hot-melt bonding with a heating iron. The function of the strapping machine is to reinforce the packaged items so that the items will not be scattered due to weak bundling during transportation and storage. At the same time, they should be bundled neatly and beautifully.

Product introductionThe working principle of the winding machine is to place the object to be wrapped on the turntable, start the turntable motor to rotate, and naturally drive the turntable to rotate, so that the object placed on the turntable can be wrapped with film around the periphery. At the same time, the elevator motor also starts, driving the entire assembly of the winding machine mold frame to move up and down to achieve winding in the height direction of the object, thus realizing the winding and packaging of the entire appearance of the object.

The explosion-proof winding machine is a packaging machine adapted to assembly line operations. It is very suitable for the automated packaging needs of modern enterprises. It plays a very positive role in improving packaging efficiency, reducing labor intensity, and effectively utilizing human resources.

Product introductionEquipped with safety protection electric eye to avoid the risk of collisionThis machine adopts PLC control, photoelectric testing of packaging height, and double safety protection deviceWith slow start and slow stop functions, the power transmission system has longer life and accurate positioningSuitable for bulky and difficult-to-move packages, eliminating the need for a forkliftFor non-standard specifications or special requirements, Liyang Intelligent Packaging can be designed and manufactured according to your requirements.Mechanical characteristicsWith multi-functional

Product introductionThe biomass pellet machine is a kind of biomass energy pretreatment equipment. It mainly uses agricultural and forestry processing waste such as wood chips, straw, rice husks, bark and other biomass as raw materials.

ModelLY-50DForming   and sealing speed8-10ctns/minCarton   sizeL200~600xW150~500xH100~500mmPower   supply110/220V,   50/60Hz, 1 PhasePower200WApplicable   tape48/60/75mm   (Choose one type)Machine   sizeL2500×W2000×H1450mmMachine   weight480kg

1) Power supply: 380V/50Hz, 1Ph, 1KW;2) PP belt width: 12~13mm3) PP belt thickness: 0.6~1.0mm4) Packing speed: 3.5 seconds/lane5) Bow frame size: width 600mm, height 1250mm6) Table height: 450+50mm7) Bonding method: hot melt bonding;8) Overall machine size: L1800*W750*H2000mm;9) Overall machine weight: 230 kg10) Binding force: 0~80kg11) Working method: one or more parallel channels, including automatic, manual, through and other methods; 

The carton unpacking machine integrates automatic unboxing, automatic folding of the lower cover, and automatic sealing of the bottom of the carton. The machine is controlled by PLC + human-machine interface. The bottom folding does not stop, and the bottom folding and bottom sealing are completed during transportation; it also completes suction, forming, bottom folding, and bottom sealing at the same time. The entire process is easy to operate, simple to maintain, and has stable performance.

Product introductionThe centrifugal fan is a machine that relies on input mechanical energy to increase the gas pressure and discharge the gas. It is a driven fluid machine. Centrifugal fans are widely used in ventilation, dust removal and cooling of factories, mines, tunnels, cooling towers, vehicles, ships and buildings; ventilation and draft induction in boilers and industrial furnaces; cooling and cooling in air conditioning equipment and household appliances.

Product descriptionWith the rapid development of technology and the arrival of mechanization, our lives have become more colorful. Automatic folding and sealing machines are witnesses of technological development. In today's market, carton sealing machines have become a common packaging equipment for various companies. The automatic folding cap sealing machine and packaging machine assembly line plays a leading role in today's packaging industry.