Steel Coil Flipping Machine
●Mechanical flipping system, no inversion will occur.
●Four-support roller mechanism ensures smooth operation of the equipment.
●Both the rollers and the flip base are equipped with safety protective covers to ensure the safety of personnel during operation.
●It has an over-current protection device. If the turning machine exceeds the maximum turning weight, it will automatically cut off the power and stop for protection, without damaging the motor.
●Equipped with French Schneider air switch, including overcurrent, overload, short circuit and phase loss protection functions.
●The inner bearing of the roller adopts solid self-lubricating copper sleeve bearing, which is wear-resistant, high-temperature resistant, graphite lubrication does not require oiling, and has greater radial bearing capacity.
●The control system adopts 24V safety voltage to ensure safe operation of employees.
●The electrical part adopts leakage protection circuit breaker, overload circuit breaker, and overcurrent protection contactor to effectively prevent safety hazards caused by leakage and overload.
●With sound and light alarm device, it can effectively remind employees of safe operation.
●Adopt multiple limit switches and mechanical protection devices to ensure safe operation.
●The equipment motor adopts slow start and slow stop to ensure smooth and fast operation. There will be no sudden collapse.
●Using hard-tooth surface helical gear industrial reducer, it has low noise, large torque and more stable operation.
●The motor has a parking brake self-locking function, which can stop the machine at any position, and the flip body is locked in place, which is safe and reliable.
●Equipped with a remote control storage box, the remote control switch and cable can be put into the storage box when not in use. Prevent exposure from causing safety hazards.
●5-meter remote control cable, capable of long-distance operation, safe and reliable.
●Optional:
①Wireless remote control handle.
② Wire-controlled operation (cable length 5 meters), with jack for easy loading and unloading.
The turning machine mainly completes the conversion of the engine casing from horizontal to vertical, vertical to horizontal and horizontal rotation operations, and can achieve vertical 90° flipping. The turning machine has a simple structure, low cost, high working efficiency, safety and reliability.
Turning machine technical requirements
(1) Airframe steel structure requirements
• The fuselage adopts Q235 high-quality all-steel welded structure, which has sufficient strength and rigidity. The flip table and body are made of 10-20mm thick high-quality mid-board.
• The rotating shafts are all made of 45# round steel, machined on a lathe, and quenched at high temperatures.
• Has higher strength.
(2) Turning machine system requirements
• Rotation slow start, effectively prevents damage to the reducer caused by sudden power-on acceleration of the motor, and effectively extends the service life of the motor.
• Powerful and sturdy body design, durable.
• Easy to operate and durable.
• Safe, stable and fast.
(3) Turning machine wiring instructions
Three 380V phase wires, one neutral wire, and one ground wire, a total of five power incoming wires, with wire diameters above 2.5mm.
Machine details:
1) weight capacity：5 tons
2) power：1.5KW
3) Flip product size：Diameter ≤ 1200mm, width ≤ 1200mm
4) flip speed：40 seconds±10%
5) environmental conditions：Noise ≤75DB, humidity ≤98%, temperature -10-40℃
6) Tying speed：≤2.5 second/Channel
7) Flip the countertop：Plane: 1200*1200mm；V side: 1200*1200 (with 12mm thickness pp anti-skid plate)
8) transfer method：Mechanical method
9) Operation method：wire control
10) self-respect：About 2.0T
11) Maximum flip angle：90°
After-sales service
1) The seller provides high-quality and fast after-sales service.
2) The shelf life is one year after the product is accepted by the user. After receiving the user's maintenance notification, the seller's maintenance personnel responded within 48 hours. If the product is outside the warranty period, or if the repair is caused by improper use during the warranty period, only the cost will be charged, that is, the cost of replacement parts and travel expenses.
3) Accessories: Adequate parts inventory. The supplier should have sufficient equipment parts as inventory, and the parts required by the demander for repair and maintenance can be quickly provided at any time.
Related News
Submitted successfully
We will contact you as soon as possible