< >

Fully Automatic Baling Machine

The fully automatic strapping machine is for the final step of packaging, which is to tie the cartons with straps to prevent them from falling apart during transportation. There are many advantages to using an automatic strapping machine. The straps produced by the cartons are beautiful and strong, and the speed is very fast, which improves the efficiency of workers. packaging efficiency. At the same time, waste is reduced and costs are saved. It is divided into plastic strapping machines, steel strapping machines, welding strapping machines, etc.

Contact Now E-mail Telephone WhatsApp

Product Details

Basic Information：

The fully automatic strapping machine control system consists of the core control unit PLC and the human-machine interface for operation. The core control unit is controlled by LG "PLC". The hydraulic system is the core part of the pressurized strapping machine, and the reliability of its work directly determines Whether the baler operates normally and reliably, oil temperature control becomes the key to the hydraulic control part of the metal hydraulic baler. For electromechanical mechanical equipment, automation, intelligence, and unitization make the design thoughtful, and its important parts must be considered. The service life of every product is determined by a core component, and that core component is often the most valuable one. For example, the core component of a baling machine is the movement; the core component of the carton sealing machine is the motor; the core component of the shrinking machine is the furnace; the production of the winding machine has been modularized, and the core components are in each module. The core component of the vacuum packaging machine is the vacuum pump. Most small vacuum packaging machines use rotary vane vacuum pumps. This is enough to see the high technical requirements for packaging machinery production.

1. Power supply: 415V 50Hz 1.0kW

2. Overall machine size: L1400mm×W628mm×H1418mm

3. Bundling specifications: Frame size: Width 1000mm × Height 600mm (customized according to product size:)

4. Work surface height: 750mm

5. Load-bearing capacity: 80 kg

6. Bundling speed: ≤2.5 seconds/lane

7. Binding force: 0-60kg (adjustable)

8. Strap specification: 12mm.

9. Reel specifications: width 160-180mm, inner diameter 200-210mm, outer diameter 400-500mm.

10. Bundling form: parallel bundling, inching, continuous beating, ball switch, foot switch, etc.

11. Bonding method: hot melt method, bottom bonding, bonding surface ≥90%, bonding position deviation ≤2mm.

12. Machine weight: 220kg

13. Optional options: ① enlarged size, ② pressurized

14. Noise: Noise ≤80dB (A) in working environment

15. Environmental conditions: humidity ≤90%, temperature 0-40℃

working principle

The packaged object is basically in the middle of the strapping machine. First, the right top body rises, compresses the front end of the belt, and tightens the strap to the object. Then the left top body rises, compresses the appropriate position of the lower strap, and the heating plate extends into the middle of the two straps. , the middle top knife rises, cuts the strap, and finally sends the next strapping strap to the position, completing a work cycle.

Safe use and maintenance：

The maintenance and lubrication of the fully automatic strapping machine is best done regularly. First of all, pay attention to keeping the machine dry. Do not let it get exposed to rain or put anything with moisture on it.