PP Spray Tower
1. Strong corrosion resistance: The PP spray tower is made of polypropylene (PP) material, which has good acid and alkali resistance and corrosion resistance and can handle corrosive gases and liquids.
2. Simple structure: The PP spray tower has a simple structure, is easy to operate, and is easy to maintain and repair. It is also more convenient to install and disassemble, and is suitable for occasions that require frequent replacement of equipment.
3. Effective gas-liquid contact: A spray device is installed inside the PP spray tower, which flushes and absorbs the gas by spraying the liquid, thereby achieving full contact between the gas and the liquid. This can improve the washing effect, improve gas purification and liquid recycling rate.
4. Efficient gas purification effect: PP spray tower can effectively remove harmful substances and particles in the gas, such as acids, alkalis, malodorous gases, etc. Different fillers and spray liquids can be selected according to different process requirements to achieve better gas purification effects.
5. Low energy consumption: The operating energy consumption of the PP spray tower is relatively low. Energy saving and emission reduction can be achieved by adjusting parameters such as liquid flow and gas flow rate. Lower operating costs compared to other washing equipment.
6. Wide scope of application: PP spray tower is suitable for a variety of waste gas treatment, such as acid, alkali, organic waste gas, etc. At the same time, PP spray tower is also suitable for different industries, such as chemical industry, pharmaceutical electroplating, etc.
7. Easy to manage: The PP spray tower adopts an automated control system, which can easily control the temperature, humidity, pressure and other parameters in the tower. It can also achieve remote monitoring and operation, which greatly improves management efficiency.
Product introduction
PP spray tower is also called PP washing tower, acid mist purification tower - acid-base waste gas treatment equipment; working principle of spray tower: waste gas is introduced into the purification tower from the air duct, and passes through the packing layer. The waste gas and the absorption liquid are fully gas-liquid two-phase. After contact absorption and neutralization reaction, the exhaust gas is purified, dehydrated and defogged by the demister plate, and then discharged into the atmosphere by the fan. The exhaust gas meets the emission requirements of local emission standards and is lower than the national emission standards.
Mechanical characteristics
Multi-layer purification and filtration
The exhaust gas is purified and filtered through multi-layer spraying and multi-layer filler layers and finally discharged through the demister layer. The multi-layer purification and filtration has a good purification effect.
Transparent window discharge port
The transparent window discharge port allows you to more intuitively check the working condition of the equipment. Timely discover and deal with problems that arise during equipment operation, and promptly and conveniently clean and install tower packing conditions
Counterflow design
The gas-liquid reverse absorption method is adopted, that is, the liquid is sprayed down from the top of the tower in the form of mist. The exhaust gas flows backward from the tower to the spray layer for purification and filtration. This treatment method can cool the exhaust gas, purify the gas and remove particles, and then discharge it into the atmosphere after passing through the demisting section.
Application scope
The spray tower is mainly suitable for processing smoke and sulfuric acid smoke. Its main internal structure uses a sprinkler head and environmentally friendly filler to fully contact the exhaust gas with the flowing water (washing liquid) on the surface of the filler to absorb the acidic or alkaline pollutants contained in the exhaust gas. matter (and particulate dust), and then separate the clean gas from the pollutant liquid to achieve the purpose of purification
After-sales service commitment:
1. When the supplier delivers the goods, he shall provide the buyer with the equipment instruction manual (electrical schematic diagram, circuit diagram, etc.) as well as the installation and maintenance instructions and packing list.
2. The equipment has a one-year warranty and lifetime maintenance.
3. During the warranty period, for equipment failures caused by non-human factors, the seller will respond within 4 hours when the equipment fails and provide technical support to solve the problem as quickly as possible. During the warranty period, we are responsible for providing damaged parts and accessories free of charge. After the warranty period, only the cost of accessories will be charged.
GET IN TOUCH
If you have any questions, please contact us and I will contact you as soon as possible.
Carry Zhang
Shandong Liyang Intelligent Equipment Co., Ltd
M.P. & WhatsApp: 0086-18653186367
Email: marketing@liyangzn.com
Address: Shop 2-203, Dayou Center, Shuangshan Street, Zhangqiu District, Jinan City 250200, Shandong, China
Related Products
Related News
Submitted successfully
We will contact you as soon as possible